| ANSI C119.0-2015 | Testing Methods and Equipment Common to the ANSI C119 Family of Standards |
| ANSI C119.1-2016 | American National Standard for Electric Connectors—Sealed Insulated Underground Connector Systems Rated 600 V |
| ANSI C119.4-2016 | American National Standard for Electric Connectors—Connectors for Use Between Aluminum-to-Aluminum and Aluminum-to-Copper Conductors Designed for Normal Operation at or Below 93°C and Copper-to-Copper |
| ANSI C119.5-2009 | American National Standard for Electric Connectors—Insulation-Piercing Connector Systems, Rated 600 V or Less (Low Voltage Aerial Bundled Cables and Insulated and Non-Insulated Line Wires) |
| ANSI C119.6-2011 | American National Standard for Electric Connectors—Non-Sealed, Multiport Connector Systems Rated 600 V or Less for Aluminum and Copper Conductors |
| ANSI C12.10-2011 | American National Standard for Physical Aspects of Watthour Meters—Safety Standard |
| ANSI C12.11-2006 (R2014) | American National Standard for Instrument Transformers for Revenue Metering, 10 kV BIL through 350 kV BIL (0.6 kV NSV through 69 kV NSV) |
| ANSI C12.1-2014 | American National Standard for Electric Meters—Code for Electricity Metering |
| ANSI C12.18-2006 (R2016) | American National Standard for Protocol Specification for ANSI Type 2 Optical Port |
| ANSI C12.19-2012 | American National Standard for Utility Industry End Device Data Tables |
| ANSI C12.20-2015 | American National Standard for Electricity Meters—0.1, 0.2, and 0.5 Accuracy Classes |
| ANSI C12.21-2006 (R2016) | American National Standard for Protocol Specification for Telephone Modem Communication |
| ANSI C12.22-2012 | American National Standard for Protocol Specification for Interfacing to Data Communication Networks |
| ANSI C12.4-1984 (R2002, R2011) | American National Standard for Registers—Mechanical Demand |
| ANSI C12.5-1978 (R2002, R2012) | American National Standard for Thermal Demand Meters |
| ANSI C12.6-1987 (R2002, R2012) | American National Standard for Phase-Shifting Devices Used in Metering, Marking and Arrangement of Terminals |
| ANSI C12.7-2014 | American National Standard for Requirements for Watthour Meter Sockets |
| ANSI C12.8-1981 (R2002, R2012) | American National Standard for Test Blocks and Cabinets for Installation of Self-Contained A-Base Watthour Meters |
| ANSI C12.9-2014 | American National Standard for Test Switches and Plugs for Transformer-Rated Meters |
| ANSI C136.10-2010 | American National Standard for Roadway and Area Lighting Equipment—Locking-Type Photocontrol Devices and Mating Receptacles—Physical and Electrical Interchangeability and Testing |
| ANSI C136.11-2011 (R2016) | American National Standard for Roadway and Area Lighting Equipment—Multiple Sockets |
| ANSI C136.1-2012 | American National Standard for Roadway and Area Lighting Equipment—Filament Lamps—A Guide for Selection |
| ANSI C136.12-2014 | American National Standard for Roadway and Area Lighting Equipment—Mercury Lamps—Guide for Selection |
| ANSI C136.13-2014 | American National Standard for Roadway and Area Lighting Equipment—Metal Brackets for Wood Poles |
| ANSI C136.14-2014 | American National Standard for Roadway and Area Lighting Equipment—Elliptically Shaped, Enclosed Side-Mounted Luminaires |
| ANSI C136.15-2015 | American National Standard for Roadway and Area Lighting Equipment—Luminaire Field Identification |
| ANSI C136.16-2014 | American National Standard for Roadway and Area Lighting Equipment—Enclosed, Post Top–Mounted Luminaires |
| ANSI C136.17-2005 (R2010, S2017)) | American National Standard for Roadway and Area Lighting Equipment—Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity Discharge Lamps—Mechanical Interchangeability of Refractors |
| ANSI C136.18-2006 (R2010) | American National Standard for Roadway and Area Lighting Equipment—High-Mast Side-Mounted Luminaires for Horizontal- or Vertical-Burning High-Intensity Discharge Lamps |
| ANSI C136.19-2017 | American National Standard for Roadway and Area Lighting Equipment—High-Pressure Sodium (HPS) and Retrofit HPS Lamps for Mercury Ballasts—Guide for Selection |
| ANSI C136.20-2012 | American National Standard for Roadway and Area Lighting Equipment—Fiber-Reinforced Composite (FRC) Lighting Poles |
| ANSI C136.21-2014 | American National Standard for Roadway and Area Lighting Equipment—Vertical Tenons Used with Post Top–Mounted Luminaires |
| ANSI C136.2-2015 | American National Standard for Roadway and Area Lighting Equipment—Dielectric Withstand and Electrical Transient Immunity Requirements |
| ANSI C136.22-2004 (R2009, R2014) | American National Standard for Roadway and Area Lighting Equipment—Internal Labeling of Luminaires |
| ANSI C136.23-2012 | American National Standard for Roadway and Area Lighting Equipment—Enclosed Architectural Luminaires |
| ANSI C136.24-2004 (R2010) | American National Standard for Roadway and Area Lighting Equipment—Non-Locking (Button)–Type Photocontrols |
| ANSI C136.25-2013 | American National Standard for Roadway and Area Lighting Equipment—Ingress Protection (Resistance to Dust, Solid Objects and Moisture) for Luminaire Enclosures |
| ANSI C136.26-2010 (R2015) | American National Standard for Roadway and Area Lighting Equipment—Troubleshooting Guide for High-Intensity Discharge (HID) Luminaires |
| ANSI C136.27-2012 | American National Standard for Roadway and Area Lighting Equipment—Tunnel Lighting and Underpass Luminaires |
| ANSI C136.28-2006 (R2011, S2017) | American National Standard for Roadway and Area Lighting Equipment—Glass Lenses Used in Luminaires |
| ANSI C136.29-2011 | American National Standard for Roadway and Area Lighting Equipment—Metal Halide Lamps—Guide for Selection |
| ANSI C136.30-2015 | American National Standard for Roadway and Area Lighting Equipment—Pole Vibration |
| ANSI C136.31-2010 | American National Standard for Roadway and Area Lighting Equipment—Luminaire Vibration |
| ANSI C136.3-2014 | American National Standard for Roadway and Area Lighting Equipment—Luminaire Attachments |
| ANSI C136.32-2012 | American National Standard for Roadway and Area Lighting Equipment—Enclosed Setback Luminaires and Directional Floodlights for High-Intensity Discharge (HID) Lamps |
| ANSI C136.34-2014 | American National Standard for Roadway and Area Lighting Equipment—Vandal Shields for Roadway and Area Lighting Luminaires |
| ANSI C136.35-2009 (R2014) | American National Standard for Roadway and Area Lighting Equipment—Luminaire Electrical Ancillary Devices (LEAD) |
| ANSI C136.36A-2010 | American National Standard for Roadway and Area Lighting Equipment—Aluminum Lighting Poles |
| ANSI C136.37-2011 | American National Standard for Solid State Light Sources Used in Roadway and Area Lighting |
| ANSI C136.38-2015 | American National Standard for Roadway and Area Lighting Equipment—Induction Lighting |