Home | Site Map | Privacy Policy | Terms and Conditions | Advertise | Contact Us

Standards and Publications
  All Standards
  About NEMA Standards
  Codes and Standards Committee
  Engineering Bulletins
  Field Representative Program
  Forums
  International Activities
  International and Regional Standardization Co...
  NEMA Policies and Strategies
  Patent Disclosure Policy
  The ABCs of Conformity Assessment
  NTCIP
  Standards by Document Number
  Standards by Title
  Popular Acronyms
  Product Certification
  ANSI Z535 Safety Alerting Standards

Standards

email | print

All Standards

NEMA > Standards > All Standards 
- W

Standards: 1 to 632 out of 632


Title:Document Number:
Protection of Receptacle Outlets in Wet Locations According to the National Electrical Code[No Document Number]
The Effects of Dimming on Color and Efficacy of LED LampsNEMA LSD 60-2012
100-Watt, M90 Single-Ended Metal Halide LampsANSI C78.1382-1996
1000-Watt, M47 Single-Ended Metal Halide LampsANSI C78.1376-1996
150-Watt, M102 Single-Ended Metal-Halide LampsANSI C78.1384-1997
1500-Watt, M48 Single-Ended Metal-Halide LampsANSI C78.1379-1997
160-Watt, 120-Volt B87 Self-Ballasted Mercury Halide LampsANSI C78.1342-1990 (R1995) (ANSI copyright)
175-Watt, M57 Single-Ended Metal Halide LampsANSI C78.1377-1996
250-Watt, M58 Single-Ended Metal Halide LampsANSI C78.1378-1997
3.0 kHz Insulation Continuity Proof Testing of Wire and CableNEMA WC 56-1986 (R2000, R2005)
34 W Fluorescent Lamps and High-Frequency Electronic BallastsNEMA LSD 5-2009
400-Watt, M59 Single-Ended Metal Halide LampsANSI C78.1375-1996
450W Self-Ballasted Mercury LampsANSI C78.1340-1990 (R1995) (ANSI copyright)
5 to 46 kV Shielded Power Cable for Use in the Transmission and Distribution of Electric EnergyNEMA WC 74-2006/ICEA S-93-639
50-Watt, M110 Single-Ended Metal-Halide LampsANSI C78.1374-1996
70-Watt, M98 Single-Ended Metal Halide LampsANSI C78.1372-1997
750-Watt, 120-Volt Self-Ballasted Mercury LampsANSI C78.1341-1990 (R1995) (ANSI copyright)
A Brief Comparison of NEMA 250 and IEC 60529[No Document Number]
A Guide for the Safe Use of Remote Illumination Systems Equipment, Including a Glossary of DefinitionsNEMA LSD 10-2000
A Lighting Systems Division Information Bulletin: Changes to the 2005 NEC Will Impact Future Metal Halide Systems OptionsNEMA LSD 31-2005
A Reasoned Approach to Solving Solderability Problems with Tin-Coated and Nickel-Coated Stranded Conductors in High-Performance Wire and Cable ApplicationsNEMA WC 65-1995 (R2003)
AC High Voltage Circuit BreakersNEMA SG 4-2009
AC Overload Test for Film Insulated Magnet WireNEMA MW 790-2000
AC Transfer Equipment, Part 2: Static AC Transfer EquipmentNEMA ICS 10-2005, Part 2
AC Vacuum-Break Magnetic Controllers Rated 1,500 V ACNEMA ICS 2-2002, Part 9 (R2007)
Acoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging (MRI) DevicesNEMA MS 4-2010
Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3NEMA UD 2-2004 (R2009)
Additional Requirements for Proximity Switches Suitable for Use in Strong Magnetic FieldsNEMA ICS 5, Annex E-2002 (R2008)
Adjustable Speed DrivesNEMA ICS 7-2006
Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements—Rating Specifications for Low Voltage Adjustable-Speed DC Power Drive SystemsNEMA ICS 61800-1-2002 (R2007)
Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements—Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive SystemsNEMA ICS 61800-2-2005
Adjustable Speed Electrical Power Drive Systems, Part 4: General Requirements—Rating Specifications for AC Power Drive Systems Above 1,000 V AC and Not Exceeding 35 kVNEMA ICS 61800-4-2004
Air Infiltration Ratings for Recessed LuminairesNEMA LSD 58-2010
Alternatives to Mercury-Containing Light Sources[No Document Number]
American National Standard Criteria for Safety SymbolsANSI Z535.3-2011
American National Standard Electric Lamps: PAR and R ShapesANSI_ANSLG C78.21-2011
American National Standard Electric Lamps: Specifications for Mercury LampsANSI_ANSLG C78.40-2011
American National Standard for 1.65 in. (42 mm) Integral Reflector, Rim Reference Projection Lamps with GX5.3 or GY5.3 Bases—Dimensions and Centering SystemsANSI C78.1417-1997
American National Standard for 2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference Tungsten Halogen (TH) Large-Screen Projection Lamps with GX5.3 BasesANSI C78.1433-2001
American National Standard for 2 in. (51 mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 BasesANSI C78.24-2001
American National Standard for AC High Voltage Power Vacuum Interrupters—Safety Requirements for X-Radiation LimitsANSI C37.85-2002 (R2010)
American National Standard for Arc-Welding Equipment—Part 1: Welding Power SourcesANSI/IEC 60974-1-2008
American National Standard for Arc-Welding Equipment—Part 11: Electrode HoldersANSI/IEC 60974-11-2009
American National Standard for Arc-Welding Equipment—Part 12: Coupling Devices for Welding CablesANSI/IEC 60974-12-2009
American National Standard for Arc-Welding Equipment—Part 2: Liquid Cooling SystemsANSI/IEC 60974-2-2009
American National Standard for Arc-Welding Equipment—Part 3: Arc Striking and Stabilizing DevicesANSI/IEC 60974-3-2009
American National Standard for Arc-Welding Equipment—Part 5: Wire FeedersANSI/IEC 60974-5-2009
American National Standard for Arc-Welding Equipment—Part 7: TorchesANSI/IEC 60974-7-2009
American National Standard for Arc-Welding Equipment—Part 8: Gas Consoles for Welding and Plasma Cutting SystemsANSI/IEC 60974-8-2008
American National Standard for Composite Suspension Insulators for Overhead Transmission Lines—TestsANSI C29.11-1989 (R1996)
American National Standard for Condensing Dichroic Coated Integral Reflector Side-Pin Tungsten Halogen (TH) Projection Lamps with GX7.9 BasesANSI C78.1434-2001
American National Standard for Degrees of Protection Provided by Enclosures (IP Code) (Identical National Adoption)ANSI/IEC 60529-2004
American National Standard for Dimensions and Centering Systems for Projection Lamps—35 mm Integral Reflector, Rim Reference Lamps with GZ4 BasesANSI C78.1421-2002
American National Standard for Dimensions and Centering Systems for Projection Lamps—51 mm (2 in.) Integral Reflector, Rim Reference Lamps with GX5.3, GY5.3 and GU5.3 BasesANSI C78.1413-2001
American National Standard for Electric Connectors—Connectors for Use Between Aluminum-to-Aluminum and Aluminum-to-Copper Conductors Designed for Normal Operation at or Below 93°C and Copper-to-CopperANSI C119.4-2011
American National Standard for Electric Connectors—Insulation-Piercing Connector Systems, Rated 600 V or Less (Low Voltage Aerial Bundled Cables and Insulated and Non-Insulated Line Wires)ANSI C119.5-2009
American National Standard for Electric Connectors—Non-Sealed, Multiport Connector Systems Rated 600 V or Less for Aluminum and Copper ConductorsANSI C119.6-2011
American National Standard for Electric Connectors—Sealed Insulated Underground Connector Systems Rated 600 VANSI C119.1-2011
American National Standard for Electric LampholdersANSI/ANSLG C81.62-2009
American National Standard for Electric Lamps—70 W, M85 Double-Ended Metal Halide LampsANSI C78.1381-1998
American National Standard for Electric Lamps—A, G, PS and Similar Shapes with E26 Medium Screw BasesANSI C78.20-2003
American National Standard for Electric Lamps—Amendments to ANSI C78.370-1997 and ANSI C78.390-1998ANSI C78.370_390lcd-2002
American National Standard for Electric Lamps—CBA Projection LampANSI C78.1408-2004
American National Standard for Electric Lamps—Characteristics of Miniature Lamps of T1 and T1¾ ShapesANSI C78.391-2004
American National Standard for Electric Lamps—Classification of the Beam Patterns of Reflector LampsANSI C78.379-2006
American National Standard for Electric Lamps—Condenser-Reflector, Four-Pin Prefocus-Base Projection Lamps—DimensionsANSI C78.1407-2004
American National Standard for Electric Lamps—Dimensions for Projection Lamps—Double-Contact, Medium-Ring, Base-Up TypeANSI C78.1401-2004
American National Standard for Electric Lamps—Double-Capped Fluorescent Lamps—Dimensional and Electrical CharacteristicsANSI/ANSLG C78.81-2010
American National Standard for Electric Lamps—Double-Ended Metal Halide LampsANSI/ANSLG C78.44-2008
American National Standard for Electric Lamps—Four-Pin, Prefocus, Base-Down TypeANSI C78.1402-2004
American National Standard for Electric Lamps—Guidelines for Low-Pressure Sodium (LPS) LampsANSI/ANSLG C78.41-2006
American National Standard for Electric Lamps—High-Intensity Discharge (HID)—Method of DesignationANSI/ANSLG C78.380-2007
American National Standard for Electric Lamps—High-Intensity Discharge (HID)—Methods of Measuring CharacteristicsANSI C78.389-2004 (R2009)
American National Standard for Electric Lamps—High-Pressure Sodium (HPS) LampsANSI/ANSLG C78.42-2009
American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications, Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting PurposesANSI/ANSLG C78.60432:1-2007
American National Standard for Electric Lamps—Incandescent Lamps—Safety Specifications, Part 3: Tungsten Halogen (TH) Lamps (Non-Vehicle)ANSI/ANSLG C78.60432:3-2007
American National Standard for Electric Lamps—Miniature and Sealed-Beam Incandescent Lamps—Method of DesignationANSI C78.390-2006
American National Standard for Electric Lamps—P28 Single-Contact Medium Prefocus-Based Projection Lamps for Base-Down Operation—DimensionsANSI C78.1406-2004
American National Standard for Electric Lamps—Procedure for Use in Preparation of Lamp Space DrawingsANSI C78.30-1997
American National Standard for Electric Lamps—Projection Lamps—VocabularyANSI C78.1452-2004
American National Standard for Electric Lamps—Safety Specifications, Part 2: Tungsten Halogen (TH) Lamps for Domestic and Similar General Lighting PurposesANSI/ANSLG C78.60432:2-2007
American National Standard for Electric Lamps—Self-Ballasted Mercury LampsANSI/ANSLG C78.45-2007
American National Standard for Electric Lamps—Single-Based Fluorescent Lamps—Dimensional and Electrical CharacteristicsANSI/IEC C78.901-2005
American National Standard for Electric Lamps—Single-Ended Metal Halide LampsANSI/ANSLG C78.43-2007
American National Standard for Electric Lamps—Single-Ended Tungsten Halogen (TH) Lamps with GZ9.5 Base, T6 Bulb, 36.5 mm Light Center Length (LCL), 76.2 mm MOL with Proximity ReflectorANSI C78.1460-2004
American National Standard for Electric Lamps—Slide Projector Lamps, Condensing, Dichroic, 2 in. (51 mm), Integral Reflector, Rim Reference Tungsten Halogen Lamps with GY5.3 BasesANSI C78.1431-1997
American National Standard for Electric Lamps—Specifications for Fluorescent Lamp StartersANSI C78.180-2003
American National Standard for Electric Lamps—Specifications for Performance of Self-Ballasted Compact Fluorescent LampsANSI C78.5-2003
American National Standard for Electric Lamps—Specifications for the Chromaticity of Solid State Lighting (SSL) ProductsANSI_ANSLG C78.377-2011
American National Standard for Electric Lamps—Standard Method of Measuring the Pinch Temperature of Quartz Tungsten-Halogen LampsANSI/IEC C78.682-1997 (R2010)
American National Standard for Electric Lamps—Tungsten Halogen (TH) Lamps with G6.35, GX6.35 and GY6.35 BasesANSI C78.1403-1997
American National Standard for Electric Lamps—Use of Protective Shields with Tungsten Halogen (TH) Lamps—Cautionary NoticeANSI C78.1451-2002
American National Standard for Electric Meters—Code for Electricity MeteringANSI C12.1-2008
American National Standard for Electric Power Systems and Equipment—Voltage Ratings (60 Hz)ANSI C84.1-2011
American National Standard for Electric Rigid Steel Conduit (ERSC)ANSI C80.1-2005
American National Standard for Electrical Lamp Bases—Specifications for Bases (Caps) for Electric LampsANSI/ANSLG C81.61-2009
American National Standard for Electrical Power Insulators—Test MethodsANSI C29.1-1988 (R2002)
American National Standard for Electrical Rigid Aluminum ConduitANSI C80.5-2005
American National Standard for Electricity Meters—0.2 and 0.5 Accuracy ClassesANSI C12.20-2010
American National Standard for Environmental and Facility Safety SignsANSI Z535.2-2011
American National Standard for Fluorescent Lamps—Guide for Electrical MeasurementsANSI C78.375-1997
American National Standard for Gas Tube Surge Arresters on Wire Line Telephone CircuitsANSI C62.61-1993
American National Standard for Gauges for Electric Lamp Bases and LampholdersANSI/ANSLG C81.63-2007
American National Standard for Harmonic Emission Limits—Related Power Quality Requirements for Lighting EquipmentANSI C82.77-2002
American National Standard for Incandescent Lamps—A, G, PS and Similar Shapes with E39 Mogul Screw BasesANSI C78.22-1995 (R2003)
American National Standard for Incandescent Lamps—Miscellaneous TypesANSI C78.23-1995 (R2003)
American National Standard for Indoor AC High Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear—Conformance Test ProceduresANSI C37.54-2002 (R2010)
American National Standard for Instrument Transformers for Revenue Metering, 10 kV BIL through 350 kV BIL (0.6 kV NSV through 69 kV NSV)ANSI C12.11-2007
American National Standard for Insulators—Composite—Distribution Deadend TypeANSI C29.13-2000
American National Standard for Insulators—Composite—Distribution Line Post TypeANSI C29.18-2003
American National Standard for Insulators—Composite—Line Post TypeANSI C29.17-2002
American National Standard for Insulators—Composite—Suspension TypeANSI C29.12-1997 (R2002)
American National Standard for Insulators—Wet-Process Porcelain and Toughened Glass—Suspension TypeANSI C29.2-1992 (R1999)
American National Standard for Intermediate Metal Conduit (EIMC)ANSI C80.6-2005
American National Standard for Lamp Ballasts—Ballasts for High-Intensity Discharge (HID) Lamps—Methods of MeasurementANSI C82.6-2005
American National Standard for Lamp Ballasts—Ballasts for High-Intensity Discharge and Low-Pressure Sodium (LPS) Lamps (Multiple-Supply Type)ANSI C82.4-2002
American National Standard for Lamp Ballasts—Definitions—for Fluorescent Lamps and BallastsANSI C82.13-2002
American National Standard for Lamp Ballasts—Fluorescent AdaptersANSI C82.12-1999
American National Standard for Lamp Ballasts—High Frequency Fluorescent Lamp BallastsANSI_ANSLG C82.11-2011
American National Standard for Lamp Ballasts—High-Intensity Discharge (HID) and Low-Pressure Sodium (LPS) Lamps—DefinitionsANSI/ANSLG C82.9-2010
American National Standard for Lamp Ballasts—Line Frequency Fluorescent Lamp BallastsANSI C82.1-2004
American National Standard for Lamp Ballasts—Low-Frequency Square Wave Electronic Ballasts—for Metal Halide LampsANSI/ANSLG C82.14-2006
American National Standard for Lamp Ballasts—Method of Measurement of Fluorescent Lamp BallastsANSI C82.2-2002
American National Standard for Marking and Arrangement of Terminals for Phase-Shifting Devices Used in MeteringANSI C12.6-1987 (R2002)
American National Standard for Method of Designation for Electric Lamps—Photographic, Stage and StudioANSI C78.370-1997 (R2003)
American National Standard for Microfilm Projection Lamps—2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference Tungsten Halogen Lamps with GX5.3 BasesANSI C78.1420-2001
American National Standard for Nomenclature for Glass Bulbs Intended for Use with Electric LampsANSI C79.1-2002
American National Standard for Polyphase Induction Motors for Power Generation StationsANSI C50.41-2000
American National Standard for Portable Lithium Primary Cells and Batteries—General and SpecificationsANSI C18.3M, Part 1-2008
American National Standard for Portable Lithium Primary Cells and Batteries—Safety StandardANSI C18.3M, Part 2-2011
American National Standard for Portable Primary Cells and Batteries with Aqueous Electrolyte—General and SpecificationsANSI C18.1M, Part 1-2009
American National Standard for Portable Primary Cells and Batteries with Aqueous Electrolyte—Safety StandardANSI C18.1M, Part 2-2011
American National Standard for Portable Rechargeable Cells and Batteries—General and SpecificationsANSI C18.2M, Part 1-2007
American National Standard for Portable Rechargeable Cells and Batteries—Safety StandardANSI C18.2M, Part 2-2007
American National Standard for Product Safety Information in Product Manuals, Instructions and Other Collateral MaterialsANSI Z535.6-2011
American National Standard for Product Safety Signs and LabelsANSI Z535.4-2011
American National Standard for Projection Lamps—Tungsten Halogen Lamps with G5.3 BasesANSI C78.1435-2002
American National Standard for Projection Lamps, Incandescent—Method for Life TestingANSI C78.1450-1983 (R2002)
American National Standard for Protocol Specification for ANSI Type 2 Optical PortANSI C12.18-2006
American National Standard for Protocol Specification for Interfacing to Data Communication NetworksANSI C12.22-2008
American National Standard for Protocol Specification for Telephone Modem CommunicationANSI C12.21-2006
American National Standard for Reference Ballasts for Fluorescent LampsANSI C82.3-2002
American National Standard for Registers, Mechanical DemandANSI C12.4-1984 (R2002, R2011)
American National Standard for Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVTs)ANSI/NEMA C93.1-1999
American National Standard for Requirements for Watthour Meter SocketsANSI C12.7-2005
American National Standard for Roadway and Area Lighting Equipment—Aluminum Lighting PolesANSI C136.36A-2010
American National Standard for Roadway and Area Lighting Equipment—Concrete Lighting PolesANSI C136.36B-2008
American National Standard for Roadway and Area Lighting Equipment—Elliptically Shaped, Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity Discharge (HID) LampsANSI C136.14-2004 (R2009)
American National Standard for Roadway and Area Lighting Equipment—Enclosed Architectural LuminairesANSI C136.23-2006
American National Standard for Roadway and Area Lighting Equipment—Enclosed Setback Luminaires and Directional Floodlights for High-Intensity Discharge (HID) LampsANSI C136.32-2006
American National Standard for Roadway and Area Lighting Equipment—Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity Discharge Lamps—Mechanical Interchangeability of RefractorsANSI C136.17-2005 (R2010)
American National Standard for Roadway and Area Lighting Equipment—Enclosed, Post Top–Mounted LuminairesANSI C136.16-2009
American National Standard for Roadway and Area Lighting Equipment—Fiber-Reinforced Composite (FRC) Lighting PolesANSI C136.20-2008
American National Standard for Roadway and Area Lighting Equipment—Filament Lamps—A Guide for SelectionANSI C136.1-2004 (R2009)
American National Standard for Roadway and Area Lighting Equipment—Film CutoutsANSI C136.5-2003 (R2009)
American National Standard for Roadway and Area Lighting Equipment—Glass Lenses Used in LuminairesANSI C136.28-2006 (R2011)
American National Standard for Roadway and Area Lighting Equipment—High-Mast Side-Mounted Luminaires for Horizontal- or Vertical-Burning High-Intensity Discharge LampsANSI C136.18-2006 (R2010)
American National Standard for Roadway and Area Lighting Equipment—High-Pressure Sodium (HPS) and Retrofit HPS Lamps for Mercury Ballasts—Guide for SelectionANSI C136.19-2011
American National Standard for Roadway and Area Lighting Equipment—Induction LightingANSI C136.38-2009
American National Standard for Roadway and Area Lighting Equipment—Ingress Protection (Resistance to Dust, Solid Objects and Moisture) for Luminaire EnclosuresANSI C136.25-2009
American National Standard for Roadway and Area Lighting Equipment—Internal Labeling of LuminairesANSI C136.22-2004 (R2009)
American National Standard for Roadway and Area Lighting Equipment—Locking-Type Photocontrol Devices and Mating Receptacles—Physical and Electrical Interchangeability and TestingANSI C136.10-2010
American National Standard for Roadway and Area Lighting Equipment—Luminaire AttachmentsANSI C136.3-2005 (R2009)
American National Standard for Roadway and Area Lighting Equipment—Luminaire Electrical Ancillary Devices (LEAD)ANSI C136.35-2009
American National Standard for Roadway and Area Lighting Equipment—Luminaire Field IdentificationANSI C136.15-2011
American National Standard for Roadway and Area Lighting Equipment—Luminaire VibrationANSI C136.31-2010
American National Standard for Roadway and Area Lighting Equipment—Luminaire Voltage ClassificationANSI C136.2-2004 (R2009)
American National Standard for Roadway and Area Lighting Equipment—Mercury Lamps—Guide for SelectionANSI C136.12-2004 (R2009)
American National Standard for Roadway and Area Lighting Equipment—Metal Brackets for Wood PolesANSI C136.13-2004 (R2009)
American National Standard for Roadway and Area Lighting Equipment—Metal Heads and Reflector Assemblies—Mechanical and Optical InterchangeabilityANSI C136.6-2004
American National Standard for Roadway and Area Lighting Equipment—Multiple SocketsANSI C136.11-2011
American National Standard for Roadway and Area Lighting Equipment—Non-Locking (Button)–Type PhotocontrolsANSI C136.24-2004 (R2010)
American National Standard for Roadway and Area Lighting Equipment—Plug-In Type Receptacle and Plug for High-Intensity Discharge (HID) IgnitorsANSI C136.33-2005
American National Standard for Roadway and Area Lighting Equipment—Series Sockets and Series-Socket ReceptaclesANSI C136.4-2003 (R2009)
American National Standard for Roadway and Area Lighting Equipment—Socket Support Assemblies for Metal Heads—Mechanical InterchangeabilityANSI C136.9-2003
American National Standard for Roadway and Area Lighting Equipment—Solar Lighting SystemsANSI C136.40-2011
American National Standard for Roadway and Area Lighting Equipment—Steel Roadway and Area Lighting PolesANSI C136.36C-2010
American National Standard for Roadway and Area Lighting Equipment—Troubleshooting Guide for High-Intensity Discharge (HID) LuminairesANSI C136.26-2010
American National Standard for Roadway and Area Lighting Equipment—Tunnel Lighting and Underpass LuminairesANSI C136.27-2005
American National Standard for Roadway and Area Lighting Equipment—Vandal Shields for Roadway and Area Lighting LuminairesANSI C136.34-2004 (R2009)
American National Standard for Roadway and Area Lighting Equipment—Vertical Tenons Used with Post Top–Mounted LuminairesANSI C136.21-2004 (R2009)
American National Standard for Safety ColorsANSI Z535.1-2011
American National Standard for Safety Tags and Barricade Tapes (for Temporary Hazards)ANSI Z535.5-2011
American National Standard for Slide Projector Lamps—Condensing, Dichroic, 1.65 in. (42 mm), Integral Reflector, Rim Reference Tungsten Halogen Lamps with GX5.3 BasesANSI C78.1430-1997
American National Standard for Solid State Light Sources Used in Roadway and Area LightingANSI C136.37-2011
American National Standard for Specification for Tubular Incandescent Infrared LampsANSI C78.261-1977 (R2007)
American National Standard for Specifications for the Chromaticity of Fluorescent LampsANSI C78.376-2001
American National Standard for Steel Electrical Metallic Tubing (EMT)ANSI C80.3-2005
American National Standard for Switchgear—Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear—Conformance Test ProceduresANSI C37.58-2003 (R2010)
American National Standard for Switchgear—Low Voltage AC Power Circuit Breakers Used in Enclosures—Test ProceduresANSI C37.50-1989 (R1995, R2000, R2010)
American National Standard for Switchgear—Medium Voltage Metal-Clad Assemblies—Conformance Test ProceduresANSI C37.55-2002 (R2010)
American National Standard for Switchgear—Metal-Enclosed Interrupter Switchgear Assemblies—Conformance TestingANSI C37.57-2003 (R2010)
American National Standard for Switchgear—Metal-Enclosed Low Voltage AC Power Circuit Breaker Switchgear Assemblies—Conformance Test ProceduresANSI C37.51-2003 (R2010)
American National Standard for Switchgear—Metal-Enclosed Low Voltage AC Power Circuit Breaker Switchgear Assemblies—Conformance Test Procedures—Amendment 1: Short-Time Withstand Current TestsANSI C37.51a-2010
American National Standard for Test Blocks and Cabinets for Installation of Self-Contained A-Base Watthour MetersANSI C12.8-1981 (R2002)
American National Standard for Test Procedures for Low-Voltage AC Power Circuit Protectors Used in EnclosuresANSI C37.52-1974 (R1995, R2000)
American National Standard for Test Switches for Transformer-Rated MetersANSI C12.9-2005
American National Standard for Thermal Demand MetersANSI C12.5-1978 (R2002)
American National Standard for Tubular Tungsten Halogen (TH) Lamps—Physical CharacteristicsANSI C78.260-2002
American National Standard for Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 63.5 mm (2½ in.)ANSI C78.1501-2001
American National Standard for Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 89 mm (3½ in.)ANSI C78.1500-2001
American National Standard for Tungsten Halogen (TH) Lamps with G38 Bases and 127 mm Light Center Length (LCL)ANSI C78.1505-2001
American National Standard for Tungsten Halogen (TH) Lamps with G9.5 Bases and 60.5 mm Light Center Length (LCL)ANSI C78.1503-2001
American National Standard for Tungsten Halogen (TH) Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5 mm Nominal Light Center LengthANSI C78.1432-1997
American National Standard for Tungsten Halogen (TH) Lamps with P28 Bases and 55.5 mm Light Center Length (LCL)ANSI C78.1504-2001
American National Standard for Utility Industry End Device Data TablesANSI C12.19-2008
American National Standard for Wet-Process Porcelain Insulators—Apparatus, Cap and Pin TypeANSI C29.8-1985 (R2002)
American National Standard for Wet-Process Porcelain Insulators—Apparatus, Post TypeANSI C29.9-1983 (R2002)
American National Standard for Wet-Process Porcelain Insulators—High Voltage Line—Post TypeANSI C29.7-1996 (R2002)
American National Standard for Wet-Process Porcelain Insulators—High Voltage Pin TypeANSI C29.6-1994 (R2002)
American National Standard for Wet-Process Porcelain Insulators—Indoor Apparatus TypeANSI C29.10-1989 (R2002)
American National Standard for Wet-Process Porcelain Insulators—Low and Medium Voltage TypesANSI C29.5-1984 (R2002)
American National Standard for Wet-Process Porcelain Insulators—Spool TypeANSI C29.3-1986 (R2002)
American National Standard for Wet-Process Porcelain Insulators—Strain TypeANSI C29.4-1989 (R2002)
American National Standard Physical Aspects of Watthour Meters—Safety StandardANSI C12.10-2011
American National Standard—Guidelines and General Information for Electrical Lamp Bases, Lampholders and GaugesANSI/IEC C81.64-2005
Ampacities of Cables Installed in Cable TraysANSI/NEMA WC 51-2009/ICEA P-54-440
Ampacities, Including Effect of Shield Losses for Single-Conductor Solid Dielectric Power Cable 15 kV through 69 kVNEMA WC 50-1976/ICEA P-53-426 Second Edition (R1993, R1999)
Annular Space Protection of Openings Created by Penetrations of Tubular Steel Conduit, A Review of UL Special Service Investigation, File NC 546, Project 90NK11650[No Document Number]
ANSI Code Update to Include Letter C for Ceramic Metal Halide LampsNEMA LSD 35-2006
ANSI Z535 Color ChartANSI Z535-2011
ANSI Z535 Set[No Document Number]
Application and Installation Guidelines for Armored Cable (AC) and Metal-Clad (MC) CableNEMA RV 1-2008
Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal and Nonmetallic ConduitsNEMA RV 3-2010
Application and Installation Guidelines for Nonmetallic-Sheathed (NM-B) Cable and Underground Feeder and Branch Circuit (UF-B) CableNEMA RV 2-2011
Application Guide for AC Adjustable Speed Drive Systems[No Document Number]
Application Guide for Ceramic Suspension InsulatorsNEMA HV 2-1991 (R1996, R2002)
Application Guide for Electric Fire Pump ControllersNEMA ICS 14-2010
Application Guide for Ground-Fault Protective (GFP) Devices for EquipmentNEMA PB 2.2-1999 (R2004, R2009)
Application Guide for Industrial Control and Systems Crane and Hoist ControllersANSI/NEMA ICS 8-2011
Application Guide for Isolated Ground Wiring Devices[No Document Number]
Application Guideline for Terminal BlocksNEMA ICS 4-2010
Application Guidelines for Service-Entrance CableNEMA RV 4-2009
Application Information for Busway Rated 600 V or LessNEMA BU 1.2-2002 (R2008)
Application Note: Wiring Requirements for 2G11 Based T5 Fluorescent Twin Lamps With Instant-Start BallastsNEMA LSD 2B-1999
Application Note: Wiring Requirements for T8 Fluorescent Lamps with Instant-Start BallastsNEMA LSD 2A-2007
Application Profile for DATEX-ASN (AP-DATEX)NTCIP 2304:2002
Application Profile for XML Message Encoding and Transport in ITS Center-to-Center CommunicationsNTCIP 2306 v01
Applications Guide for Carbon Monoxide Alarms and DetectorsNEMA SB 7-2011
Audio Standard for Nurse Call SystemsNEMA SB 10-1991 (R1998, R2005, R2010)
Avoid Arc-Flash Occurrences by Following Industry Standards[No Document Number]
Bar Coding and Control Wire and Cable ProductsWC 60.1-1995
Best Practices for Metal Halide Lighting Systems, Plus Questions and Answers about Lamp Ruptures in Metal Halide Lighting SystemsNEMA LSD 25-2008
Best Practices for Operating Fluorescent Lighting SystemsNEMA LSD 27-2005
Binational Wire and Cable Packaging StandardNEMA WC 26/EEMAC 201-2008
Brushes for Electrical MachinesNEMA CB 1-2000
BuswaysNEMA BU 1
Cable Tray Installation GuidelinesNEMA VE 2-2006
Calendered Aramid Papers Used for Electrical InsulationANSI/NEMA FI 3-2004
Center-to-Center Naming Convention SpecificationNTCIP 1104 v01
Characteristics of and Test Procedures for a Phantom to Benchmark Cardiac Fluoroscopic and Photographic PerformanceNEMA XR 21-2000
Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images (MRI)NEMA MS 9-2008
Characterization of the Specific Absorption Rate (SAR) for Magnetic Resonance Imaging SystemsNEMA MS 8-2008
Coated Electrical SleevingNEMA TF 1-1993 (R2000, R2005)
Communications Systems for Life Safety in SchoolsANSI/NEMA SB 40-2010
Communications-Type Battery ChargersNEMA PE 7-1997 (R2003)
Compact Fluorescent Lamps in Residences—Power Quality ImplicationsNEMA LSD 8-1999
Compatibility of Add-on Tube Guards with T8 Fluorescent Lamps Operating on High-Frequency Electronic BallastsNEMA LSD 9-2000 (R2011)
Compatibility of Fluorescent Lamps and Electronic Ballasts in Frequently Switched ApplicationsNEMA LSD 18-2003
Compatibility of Forward Phase Control Dimmers and Dimmable Self-Ballasted Compact Fluorescent Lamps and Frequently Asked Questions Regarding CFLs and DimmingNEMA LSD 56-2011
Computed Tomography Dose CheckNEMA XR 25-2010
Conduit-in-Casing Construction[No Document Number]
Consumer Guide for 4-Ft Fluorescent BulbsNEMA LSD 17-1997 (R2001)
Continuity of Coating Testing for Electrical ConductorsNEMA WC 72-1999 (R2004)
Control Circuit and Pilot DevicesNEMA ICS 5-2000 (R2005, R2010)
Controllers, Contactors and Overload Relays Rated 600 VNEMA ICS 2-2000 (R2005)
Controllers, Contactors and Overload Relays Rated Not More Than 2,000 V AC or 750 V DC, Part 8: Disconnect Devices for Use in Industrial Control EquipmentNEMA ICS 2-1996, Part 8 (R2004, R2009)
Cross-Linked-Thermosetting-Polyethylene-Insulated Wire & Cable for the Transmission & Distribution of Electric EnegyWC 7-1988
Data Element Definitions for Transportation Sensor Systems (TSS)NTCIP 1209:2011
DDM Projection LampANSI C78.1414-1988 (R1994) (ANSI copyright)
Deadfront Distribution SwitchboardsNEMA PB 2-2011
DED Projection LampANSI C78.1415-1989 (R1994) (ANSI copyright)
Demand Reduction and Energy Savings Using Occupancy SensorsNEMA LSD 22-2001
Determination of Gradient-Induced Electric Fields in Diagnostic Magnetic Resonance ImagingNEMA MS 11-2010
Determination of Image Uniformity in Diagnostic Magnetic Resonance ImagesNEMA MS 3-2008
Determination of Local Specific Absorption Rate (SAR) in Diagnostic Magnetic Resonance Imaging (MRI)NEMA MS 10-2010
Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance ImagingNEMA MS 1-2008
Determination of Signal-to-Noise Ratio and Image Uniformity for Single-Channel, Non-Volume Coils in Diagnostic Magnetic Resonance Imaging (MRI)NEMA MS 6-2008
Determination of Slice Thickness in Diagnostic Magnetic Resonance ImagingNEMA MS 5-2009
Determination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance ImagesNEMA MS 2-2008
Diagrams, Device Designations and SymbolsNEMA ICS 19-2002 (R2007)
Digital Imaging and Communications in Medicine (DICOM)[No Document Number]
Digital Imaging and Communications in Medicine (DICOM) Part 13: Print Management Point-to-Point Communication SupportPS 3.13-2001
Digital Imaging and Communications in Medicine (DICOM) Part 9: Point to Point Communication Support for Message ExchangePS 3.9-2000
Digital Imaging and Communications in Security Information Object Definitions (IODs)NEMA IIC 1 v01
Dimming of T8 Fluorescent Lighting SystemsNEMA LL 9-2011
Distribution Equipment Switch Application Guide, A User's ReferenceNEMA KS 2-2011
DNF Projection LampsANSI C78.1404-1991 (R1995) (ANSI copyright)
Dry Type Transformers for General ApplicationsNEMA ST 20-1992 (R1997)
Dynamic Coefficient of Friction of Film-Insulated Magnet WireNEMA MW 750-2009
Effects of EPAct 2005 on Mercury Vapor (MV) Lamp Ballasts and Lighting Systems—Frequently Asked QuestionsNEMA LSD 37-2008
EJL Projection LampANSI C78.1409-1991 (R1995) (ANSI copyright)
ELB Projection LampANSI C78.1410-1991 (R1995) (ANSI copyright)
ELC Projection LampANSI C78.1411-1991 (R1995) (ANSI copyright)
Electric Arc-Welding Power SourcesNEMA EW 1-1988 (R1994, R1999, R2004)
Electric Lamps—250 Watt, 120 Volt, Self-Ballasted Mercury Lamps SpecificationsANSI C78.1380-1988 (ANSI Copyright)
Electric Power Connection for SubstationsANSI/NEMA CC 1-2009
Electrical and Electronic Crosslinked, Modified Low Smoke Polyolefin (XLPO) Insulated Hook-Up Wire, Types LS (105°C-600 V), ZHDM (90°C-600 V), ZHDH (90°C-600 V), ZH (125°C-600 V), and ZHX (125°C-1000 V)NEMA HP 8-2009
Electrical and Electronic Crosslinked, Modified Polyethylene (XLPE) Insulated 125°C Hook-Up Wire, Types L (600 V), LL (1,000 V) and LX (3,000 V)NEMA HP 5-2009
Electrical and Electronic Fluorinated Ethylene Propylene (FEP) Insulated High-Temperature Hook-Up Wire, Types KT (250 V), K (600 V) and KK (1,000 V)ANSI/NEMA HP 4-2000 (R2005)
Electrical and Electronic Polytetrafluoroethylene (PTFE) Insulated High-Temperature Hook-Up Wire, Types ET (250 V), E (600 V) and EE (1,000 V)ANSI/NEMA HP 3-2001
Electrical and Electronic PVC, PVC/Nylon, and PE/Nylon 105ºC Hook-Up Wire, Types B, C, D, BN, CN, and DN (600, 1000, and 3000 V), and Types J and JN 75ºC (600V)NEMA HP 7-2011
Electrical and Electronic Silicone and Silicone-Braided Insulated Hook-Up Wire Types S (600 V), ZHS (600 V), SS (1,000 V), ZHSS (1,000 V) and SSB Braided (1,000 V)NEMA HP 6-2007
Electrical Installation Requirements: A Global Perspective[No Document Number]
Electrical Insulating VarnishNEMA RE 2-1999
Electrical Nonmetallic Tubing (ENT)NEMA TC 13-2005
Electrical Polyvinyl Chloride (PVC) Tubing and ConduitNEMA TC 2-2003
Electrical Product Acceptance in Europe: NEMA Guide to New Approach Directives and CE Marking[No Document Number]
Electrical, Thermal and Loading Characteristics of X-Ray Tubes Used for Medical DiagnosisNEMA XR 19-1993 (R1999)
Electronic Drivers for LED Devices, Arrays or SystemsNEMA SSL 1-2010
Emergency Communications Audio Intelligibility Applications GuideNEMA SB 50-2008
EML Projection LampANSI C78.1419-1991 (R1995) (ANSI copyright)
EMM Projection LampANSI C78.1412-1991 (R1995) (ANSI copyright)
Enclosed and Miscellaneous Distribution Equipment Switches (600 V Maximum)NEMA KS 1-2001 (R2006)
EnclosuresNEMA ICS 6-1993 (R2001, R2006)
Enclosures for Electrical Equipment (1,000 V Maximum)NEMA 250-2008
End-of-Life Operation of Small Diameter (5/8 in. Diameter or Less) Pin-Based Fluorescent LampsNEMA LSD 21-1998 (R2002)
Energy Efficiency for Electronic Ballasts for T8 Fluorescent LampsNEMA BL 2-2009
Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction MotorsNEMA MG 10-2001 (R2007)
Energy Management Guide for Selection and Use of Single-Phase MotorsNEMA MG 11-1977 (R1997, R2001, R2007)
Energy-Efficiency Requirements for Programmable ThermostatsNEMA DC 3, Annex A-2010
Engineering Series Ratings: Is It Practical?[No Document Number]
Environmental, Health and Safety (EHS) Policies and Practices Benchmarking Study[No Document Number]
Environmentally Conscious Design for Electrical and Electronic ProductsANSI/IEC 62430-2010
Establishing Levels of Selective Coordination for Low Voltage Circuit BreakersNEMA AB 5-2011
Ethernet Subnetwork ProfileNTCIP 2104:2003
Ethylene-Propylene-Rubber-Insulated Wire & Cable for the Transmission & Distribution of Electrical EnergyWC 8-1988
Evaluating Water-Damaged Electrical Equipment[No Document Number]
Exit Sign Brightness for Visibility and SafetyNEMA LSD 13-2001
Exit Sign Visibility Testing Requirements for Safety and Energy EfficiencyNEMA EM 1-2010
Expansion Epoxy-Based Fittings for RTRC Rigid Nonmetallic ConduitNEMA PRP 3-2009
Expansion Fittings for Polyvinyl Chloride (PVC) Rigid Nonmetallic ConduitNEMA PRP 4-2009
EYB Projection LampANSI C78.1418-1991 (R1995) (ANSI copyright)
Failure Modes for Self-Ballasted Compact Fluorescent Lamps (SBCFLs)—A NEMA UpdateNEMA LSD 40-2008
Fiberglass Cable Tray SystemsNEMA FG 1-1993
File Transfer Protocol Application ProfileNTCIP 2303:2001
Fire Service Annunciator and InterfaceNEMA SB 30-2005
Fittings for Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground InstallationNEMA TC 9-2004
Fittings, Cast Metal Boxes and Conduit Bodies for Conduit, Electrical Metallic Tubing (EMT) and CableANSI/NEMA FB 1-2012
Flashlight Basic Performance StandardANSI/NEMA FL 1-2009
Fluorescent Ballast ConnectorNEMA BL 1-1997 (R2002)
Fluorescent Dimming Standards Development ReportNEMA LSD 61-2012
Fluorescent Lamps and the Environment[No Document Number]
for incandescent lamps: Tungsten Halogen Lamps (non-vehicle)ANSI_ANSLG C78.357-2010
Four-Pin Spiral Compact Fluorescent Lamp Systems Issues, Recommendations and StandardizationNEMA LSD 39-2007
General Color Requirements for Wiring DevicesNEMA WD 1-1999 (R2005, R2010)
General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or LessNEMA BU 1.1-2010
General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 V or LessANSI/NEMA PB 2.1-2007
General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or LessANSI/NEMA PB 1.1-2007
General Specification for Consultants, Industrial and Municipal: NEMA Premium® Efficiency Electric Motors (600 V or Less)[No Document Number]
Generic Designation System for Pin-Based Compact Fluorescent and T5 Twin Fluorescent LampsNEMA LL 7-2006
Global Object (GO) DefinitionsNTCIP 1201 v03
Glossary of Terms Pertaining to Remote Illumination SystemsNEMA LSD 4-1999
Graphic Symbols for Arc-Welding and Cutting ApparatusNEMA EW 4-2009
Green Marking of Lamps[No Document Number]
Grounding Rod Electrodes and Grounding Rod Electrode CouplingsANSI/NEMA GR 1-2007
Guide for Determining Energy Efficiency for Distribution TransformersNEMA TP 1-2002
Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation and Portable Cables for TestNEMA WC 54-2008/ANSI/ICEA T-26-465
Guide for Handling and Maintenance of AC Outdoor High Voltage Circuit BreakersNEMA SG 11-2008
Guide for Preparation of NEMA Standards PublicationsNEMA NS 1-2005
Guide for Proper Use of Smoke Detectors in Duct Applications[No Document Number]
Guide for Proper Use of System Smoke DetectorsNEMA SB 11-2011
Guide for the Application, Handling, Storage, Installation and Maintenance of Medium Voltage AC Contactors, Controllers and Control CentersNEMA ICS 3.1-2009
Guide to OSHA and NFPA 70E Safety Regulations when Servicing and Maintaining Medium Voltage Switchgear and Circuit Breakers Rated Above 1,000 VNEMA SG 10-2008
Guide to Preparing a Design Proposal for Paralleling Customer Generation with an Electric Utility[No Document Number]
Guidelines for Inspection and Preventive Maintenance of Molded-Case Circuit Breakers Used in Commercial and Industrial ApplicationsANSI/NEMA AB 4-2009
Guidelines for Inspection and Preventive Maintenance of Switches Used in Commercial and Industrial ApplicationsNEMA KS 3-2010
Guidelines for Precautionary Labeling for Arc-Welding and Cutting ProductsNEMA EW 6-2006
Guidelines for Precautionary Labeling of Magnet WireNEMA MW 800-1996
Guidelines on the Application of Dimming to High-Intensity Discharge LampsNEMA LSD 14-2010
Hardware Standards for Dynamic Message Signs (DMS) with NTCIP RequirementsNEMA TS 4-2010
Hazards of Working Electrical Equipment Hot[No Document Number]
High Voltage X-Ray Cable Assemblies and ReceptaclesNEMA XR 7-1995 (R2000)
High-Power White LED Binning for General IlluminationNEMA SSL 3-2011
High-Pressure Decorative Laminates (HPDL)ANSI/NEMA LD 3-2005
High-Pressure Power Wash Test Procedure for Self-Contained Control-Circuit DevicesNEMA ICS 5, Annex F-2002 (R2007)
High-Temperature and Electronic Insulated Wire, Impulse Dielectric TestingNEMA WC 52-2005
High-Temperature Instrumentation and Control CablesNEMA HP 100-1991 (R1999, R2005, R2010) Series (HP 100-100.4)
Impact of Electrostatic Discharges in the Hospital EnvironmentNEMA SB 29-1994
Impact of Mercury Legislation on the Lighting Industry[No Document Number]
Incompatibility of T8 Ballasts (RS, PS, Dimming) and Shunted Bi-Pin LampholdersNEMA LSD 29-2005
Industrial Control and Systems: General RequirementsNEMA ICS 1-2000 (R2005, R2008)
Industrial Control and Systems: Profiles of Networked Industrial Devices—Part 1: General RulesNEMA ICS 12.1-1997
Industrial Laminated Thermosetting ProductsNEMA LI 1-2011
Information Guide for General Purpose Industrial AC Small and Medium Squirrel-Cage Induction Motor StandardsNEMA MG 1-2007 Condensed
Informational Guide to Electrical Industrial TopicsNEMA ICS 20-2009
Instrucciones Generales para el Manejo, Instalacion, Operacion y Mantenimiento Correcto de Tableros de Distribucion de Frente Muerto Hasta 600 V Nominales o MenosNEMA PB 2.1-2002 (Spanish)
Instrucciones Generales para el Manejo, Instalacion, Operacion y Mantenimiento de Electroductos Hasta 600 V Nominales o MenosNEMA BU 1.1-2005 (Spanish)
Instrucciones Generales para la Instalacion, Operacion y el Mantenimiento Correcto de Tableros de Alumbrado y Control Hasta 600 V Nominales o MenosNEMA PB 1.1-2002 (Spanish)
Instructions for the Handling, Installation, Operation and Maintenance of Electric Fire Pump Controllers Rated Not More Than 600 VNEMA ICS 15-2011
Instructions for the Handling, Installation, Operation and Maintenance of Motor Control Centers Rated Not More Than 600 VNEMA ICS 2.3-1995 (R2002, R2008)
Instrument Transformers for Revenue Metering (110 kV BIL and Less)NEMA EI 21.1-1993 (R2002)
Instrument Transformers for Revenue Metering (125 kV BIL through 350 kV BIL)NEMA EI 21.2-1991 (R1997, R2002)
Interaction of Infrared Controls and Electronic Compact Fluorescent LampsNEMA LSD 3-1998
Interaction of Infrared Controls and Fluorescent Lamp/Ballast Systems in Education FacilitiesNEMA LSD 6-1999
Interconnection Circuitry of Noncoded Remote Station Protective Signaling SystemsNEMA SB 3-1969 (R1989, R1994)
Internet (TCP/IP and UDP/IP) Transport ProfileNTCIP 2202:2001
Land-Based Steam Turbine Generator Sets 0 to 33,000 kWNEMA SM 24-1991 (R1997, R2002)
Lead in Household LampsNEMA LSD 48-2009
Limits on Mercury Content in Self-Ballasted Compact Fluorescent LampsNEMA LL 8-2010
Looking Ahead to UL 2560NEMA SBP 1-2010
Low Voltage Cartridge FusesNEMA FU 1-2002 (R2007)
Low-Voltage Surge-Protection (LVSP) DevicesNEMA LS 1-1992 (R2000)
Luminaire Ballast Disconnects NEMA LSD 43-2008
Magnet WireANSI/NEMA MW 1000-2011
Manufactured Electrical MicaANSI/NEMA FI 1-2004
Manufactured Graphite/Carbon ElectrodesNEMA CG 1-2001
Manufacturer Disclosure Statement for Medical Device SecurityHIMSS/NEMA HN 1-2008
Maps and Directories[No Document Number]
Marking of Luminaire Codes on Metal Halide LampsNEMA LSD 24-2003
Measurement of Dimensions and Properties of Focal Spots of Diagnostic X-Ray TubesNEMA XR 5-1992 (R1999)
Measurement of the Maximum Symmetrical Radiation Field from a Rotating Anode X-Ray Tube Used for Medical DiagnosisNEMA XR 10-1986 (R1992, R1998, R2003)
Measurement Procedure for Time Varying Gradient Fields (dB/dt) for Magnetic Resonance Imaging SystemsNEMA MS 7-1993 (Revision 1998)
Mechanical Safety Standard for Power Driven Motions of Electromedical EquipmentNEMA XR 13-1990 (R1995, R2000)
Medium Voltage Controllers Rated 2,001 to 7,200 V ACNEMA ICS 3-2005 (R2010)
Mercury Lamps—Method of Measuring CharacteristicsANSI C78.386-1989 (R1994)
Metal Cable Tray SystemsNEMA VE 1-2009
Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage ApparatusNEMA 107-1987 (R1993)
MG 1-2006 Rev 1 2007 (revised pages only)NEMA MG 1-2006 Revision 1 2007 revised pages only
Molded-Case Circuit Breakers (MCCBs) Reduce Arc Flash Hazard Impact[No Document Number]
Molded-Case Circuit Breakers and Their ApplicationNEMA AB 3-2006
Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker EnclosuresNEMA AB 1
Motion/Position Control Motors, Controls and Feedback DevicesNEMA ICS 16-2001
Motor Control CentersNEMA ICS 18-2001 (R2007)
Motors and GeneratorsNEMA MG 1-2011
Motors and Generators, Revision 1NEMA MG 1-2003, Revision 1-2004
National Transportation Communications For ITS Protocol—Class B ProfileNTCIP 2001:1996
NEMA Analysis of the Energy Policy Act of 1992[No Document Number]
NEMA Analysis of the Energy Policy Act of 1992: The Scope of Electric Motors Subject to Efficiency Standards on October 24, 1997[No Document Number]
NEMA and IEC Devices for Motor Service—A Guide for Understanding the DifferencesNEMA ICS 2.4-2003
NEMA Applications Guide for Carbon Monoxide Alarms and Detectors[No Document Number]
NEMA Complete Set of Standards[No Document Number]
NEMA Guide to Code Requirements for Fire Alarm and Detection Systems[No Document Number]
NEMA Guidelines for the Selection and Installation of Underground Nonmetallic DuctNEMA TCB 2-2000
NEMA Installation Guide for Nurse Call Systems (R2007)[No Document Number]
NEMA Technical Report Definitions for Calculations of VA, VAh, VAR, and VARh for Poly-Phase Electricity MetersNEMA C12.24 TR-2011
NEMA WD 6: Dimensions for Wiring Devices [No Document Number]
NEMA WD 6: Locking Plugs and Receptacles[No Document Number]
NEMA WD 6: Non-Locking Plugs and Receptacles[No Document Number]
NEMA WD 6: Specific Purpose Plugs and Receptacles[No Document Number]
Nonmetallic Outlet Boxes, Device Boxes, Covers and Box SupportsANSI/NEMA OS 2-2008 (R2010)
Nonmetallic Riser U-Type GuardsNEMA TC 19-2001 (R2009)
Object Definitions for Actuated Traffic Signal Controller (ASC) Units—Version 02NTCIP 1202:2005
Object Definitions for Closed-Circuit Television (CCTV) Camera ControlNTCIP 1205:2001
Object Definitions for Closed-Circuit Television (CCTV) SwitchingNTCIP 1208:2005
Object Definitions for Data Collection and Monitoring (DCM) DevicesNTCIP 1206:2005
Object Definitions for Dynamic Message Signs (DMS)NTCIP 1203:2011
Object Definitions for Electrical and Lighting Management Systems (ELMS)NTCIP 1213 v02
Object Definitions for Environmental Sensor Station (ESS)NTCIP 1204 v02
Object Definitions for Ramp Meter Control (RMC) UnitsNTCIP 1207:2007
Object Definitions for Signal Control and Prioritization (SCP)NTCIP 1211 v01
Occupancy Motion Sensors StandardNEMA WD 7-2011
Octet Encoding Rules (OER) Base ProtocolNTCIP 1102:2004
Outdoor Lighting and Human/Animal Factors: An Industry OpinionNEMA LSD 55-2010
Packaging of Master Bundles for EPC-40 Polyvinyl Chloride (PVC) ConduitNEMA TC 18-2004
Packaging of Master Bundles for Steel Rigid Conduit, Intermediate Metal Conduit (IMC) and Electrical Metallic Tubing (EMT)NEMA RN 2-1987 (R1992, R2001)
PanelboardsNEMA PB 1-2011
Part 1: Electromechanical AC Transfer Switch EquipmentNEMA ICS 10-2005, Part 1
Performance Measurements and Quality Control Guidelines for Non-Imaging Intraoperative Gamma ProbesNEMA NU 3-2004
Performance Measurements of Gamma CamerasNEMA NU 1-2007
Performance Measurements of Positron Emission Tomographs (PETs)NEMA NU 2-2007
Performance Measurements of Small Animal Positron Emission Tomographs (PETs)NEMA NU 4-2008
Performance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair CablesANSI/NEMA WC 66-2001
Performance Standard for Coaxial Premise Data Communications CablesANSI/NEMA WC 63.2-1996 (R2003)
Performance Standard for Twisted Pair Premise Voice and Data Communications CablesNEMA WC 63.1-2005
Performance Testing for Lighting Controls and Switching Devices with Electronic Drivers and Discharge BallastsNEMA 410-2011
Performance, Application, Fabrication, and Installation of High Pressure Decorative LaminatesNEMA LD 3.1-1995
Photoluminescent Exit Signage—Factual ReviewNEMA LSD 46-2009
Pin-Based Compact Fluorescent Lamps[No Document Number]
Plugs, Receptacles and Connectors of the Pin-and-Sleeve Type for Hazardous LocationsANSI/NEMA FB 11-2000
Point to Multi-Point Protocol Using FSK Modem Subnetwork ProfileNTCIP 2102:2003
Point to Multi-Point Protocol Using RS-232 Subnetwork ProfileNTCIP 2101:2001
Point-to-Point Protocol over RS-232 Subnetwork ProfileNTCIP 2103 v02
Polyvinyl Chloride (PVC) Externally Coated Galvanized Rigid Steel Conduit and Intermediate Metal Conduit (IMC)NEMA RN 1-2005
Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and TubingNEMA TC 3-2004
Polyvinyl Chloride (PVC) Plastic Utilities for Underground InstallationsNEMA TC 6 & 8-2003
Portable and Power Feeder Cables for Use in Mines and Similar ApplicationsNEMA WC 58-2008/ICEA S-75-381
Powdered GraphiteNEMA CG 2-2004
Power Cables Rated 2,000 V or Less for the Distribution of Electrical EnergyANSI/NEMA WC 70-2009/ICEA S-95-658-2009
Power Supply Guidelines for X-Ray MachinesNEMA XR 9-1984 (R1994, R2000)
Power Switchgear AssembliesNEMA SG 5-1995
Power Switching EquipmentNEMA SG 6-2000
Preventive Maintenance of Industrial Control and Systems EquipmentNEMA ICS 1.3-1986 (R2001, R2009)
Primary User Controls for Interventional Angiography X-Ray EquipmentNEMA XR 24-2008
Procedure for Determining Luminaire Efficacy Ratings for Commercial, Non-Residential Downlight LuminairesNEMA LE 5A-1999
Procedure for Determining Luminaire Efficacy Ratings for Fluorescent LuminairesNEMA LE 5-2001
Procedure for Determining Luminaire Efficacy Ratings for High-Intensity Discharge (HID) Industrial LuminairesNEMA LE 5B-1998
Procedure for Determining Target Efficacy Ratings (TER) for Commercial, Industrial and Residential LuminairesNEMA LE 6-2009
Procedure for Evaluating Ground Fault Circuit Interrupters for Response to Conducted Radio Frequency EnergyPP 1-1986 (R1996)
Procedure for U-shaped Fluorescent Lamp Sample Preparation and the TCLPNEMA LL 5-1999
Procedures for Creating Management Information Base (MIB) FilesNTCIP 8005 v01
Procedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP)ANSI/NEMA C78.LL 1256-2003
Procedures for High-Intensity Discharge (HID) Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP)ANSI/NEMA C78.LL 3-2003
Procedures for High-intensity Discharge Lamp Sample Preparation and the TCLPNEMA LL 3-1999
Procedures for Incandescent Lamp Sample Preparation and the TCLPNEMA LL 4-1999
Procedures for Incandescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP)ANSI/NEMA C78.LL 4-2003
Procedures for Integral Electronic Compact Fluorescent Lamp Sample Preparation and the TCLPNEMA LL 6-1999
Procedures for Linear Fluorescent Lamp Sample Preparation and the TCLPNEMA LL 1-1997
Procedures for Pin-Based Compact Fluorescent Lamp Sample Preparation and the TCLPNEMA LL 2-1997 (R2002)
Product Identification and Bar Coding Requirements for Building Wire ProductsNEMA WC 60.2-1994 (R1999)
Product Identification Numbers for Metallic Tubular Conduit Products for Use with Bar Coding and Electric Data Interchange (EDI) ApplicationsNEMA RN 3-1991 (R2002)
Product Safety Guide for Developing Documentation for Fire Alarm Systems and EquipmentNEMA SB 28-1992 (R1997, R2003)
Profile FrameworkNTCIP 8003:2001
Programmable Controllers (PLC), Part 1: General InformationNEMA IA 2.1-2005
Programmable Controllers (PLC), Part 2: Equipment Requirements and TestNEMA IA 2.2-2005
Programmable Controllers (PLC), Part 3: Programming LanguagesNEMA IA 2.3-2005
Programmable Controllers (PLC), Part 4: User GuidelinesNEMA IA 2.4-2005
Programmable Controllers (PLC), Part 5: CommunicationsNEMA IA 2.5-2005
Programmable Controllers (PLC), Part 7: Fuzzy Control ProgrammingNEMA IA 2.7-2005
Programmable Controllers (PLC), Part 8: Guidelines for the Application and Implementation of Programming LanguagesNEMA IA 2.8-2005
Programmable Motion Control Handbook[No Document Number]
Proposal for Digital Protocol for Lighting Control DevicesNEMA LSD 53-2010
Quality Control Manual Template for Manufacturers of Displays and Workstations Labeled for Final Interpretation in Full-Field Digital Mammography (FFDM)NEMA XR 22-2006
Quality Control Manual Template for Manufacturers of Hardcopy Output Devices Labeled for Final Interpretation in Full-Field Digital Mammography (FFDM)NEMA XR 23-2006
Quality Informational Guide for Automatic Fire Detection and Alarm Systems[No Document Number]
Quantification and Mapping of Geometric Distortion for Special ApplicationsNEMA MS 12-2010
Quick-Connect TerminalsNEMA DC 2-1982 (R1988)
Radioactive Substances in Compact Fluorescent LampsNEMA LSD 15-1993 (R2001)
Recessed Luminaires—Ceiling CompatibilityNEMA LE 4-2006
Reclaiming of Magnet Wire PackagingNEMA MW 765-2003 (R2008)
Recommendations for Solid State Lighting Sub-Assembly Interfaces for LuminairesNEMA LSD 45-2009
Recommendations for the Care and Maintenance of High-Intensity Metal Halide and Mercury Lighting in Schools[No Document Number]
Recommendations on AFCI / Home Electrical Product CompatibilityNEMA ABP 2-2011
Recommended Practice—Lamp Seasoning for Fluorescent Dimming SystemsNEMA LSD 23-2010
Recommended Practices for Load-Bearing Mechanical Assemblies Used in Diagnostic ImagingNEMA XR 14-1990 (R1995, R2000)
Recommended Practices for T8 Rapid-Start Fluorescent Lamp Dimming (17 W, 25 W, 32 W and 40 W Lamps)NEMA LSD 34-2006
Reinforced Thermosetting Resin Conduit (RTRC) and FittingsNEMA TC 14-2002
Relative Temperature Indices of Industrial Thermosetting LaminatesNEMA LI 6-1993 (R1999, R2005)
Repeated Spark/Impulse Dielectric TestingNEMA WC 62-1992 (R1999, R2004)
Requirements for Smart Meter UpgradeabilityNEMA SG-AMI 1-2009
Residential Controls—Class 2 TransformersNEMA DC 20-1992 (R2003, R2009)
Residential Controls—Electrical Wall-Mounted Room ThermostatsNEMA DC 3-2008
Residential Controls—Hot Water Immersion ControlsNEMA DC 12-1985 (R1991, R1996, R2002, R2008)
Residential Controls—Line Voltage Integrally Mounted Thermostats for Electric HeatersNEMA DC 13-1979 (R1985, R1991, R1997, R2002, R2008)
Residential Controls—Surface-Type Controls for Electric Storage Water HeatersNEMA DC 5-1989 (R1996, R2002, R2008)
Residential Controls—Temperature Limit Controls for Electric Baseboard HeatersNEMA DC 10-2009
Retrofit Lamps: Minimum Performance RequirementsNEMA SSL 4-2012
Returnable Packaging for 24x6 Magnet Wire ReelsNEMA MW 780-2005 (R2011)
Roadway and Area Lighting Equipment—Metal Halide Lamps—Guide for SelectionANSI/NEMA C136.29-2011
Rubber-Insulated Wire & Cable for the Transmission & Distribution of Electrical EnergyWC 3-1992
Safety Bulletin: NEMA Safety Considerations for Residential Transfer Equipment and Residential Transfer SwitchesNEMA ICS 10-2010, Part 3
Safety Guidelines for the Application, Installation and Maintenance of Solid State ControlNEMA ICS 1.1-1984 (R1988, R1993, R1998, R2003, R2009)
Safety Labels for Pad-Mounted Switchgear and Transformers Sited in Public AreasNEMA 260-1996 (2004)
Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and GeneratorsNEMA MG 2-2001 Rev 1-2007
Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable Speed Drive SystemsNEMA ICS 7.1-2006
Selection and Installation Guidelines for Electrical Outlet BoxesNEMA OS 3-2007
Selection and Installation Guidelines for Fittings for Use with Flexible Electrical Conduit and CableNEMA FB 2.20-2012
Selection and Installation Guidelines for Fittings for Use with Non-Flexible Electrical Metal Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit and Electrical Metallic Tubing)NEMA FB 2.10-2012
Selective CoordinationNEMA ABP 1-2010
Semi-Automatic Wire-Feed Systems for Arc WeldingNEMA EW 3-1983 (R1995, R1999, R2002)
Sheet-Steel Outlet Boxes, Device Boxes, Covers and Box SupportsANSI/NEMA OS 1-2008 (R2010)
Shunt CapacitorsNEMA CP 1-2000 (R2008)
Simple Transportation Management FrameworkNTCIP 1101:1996
Simple Transportation Management Framework (STMF) Application Profile (AP) (AP-STMF)NTCIP 2301 v02
Simulated Insertion Force Test for Film-Insulated Round Magnet WireNEMA MW 785-2000 (R2006, R2011)
Smart Meter Package[No Document Number]
Smooth Wall Coilable Electrical Polyethylene ConduitNEMA TC 7-2005
Solid State Lighting for Incandescent Replacement—Best Practices for DimmingNEMA LSD 49-2010
Solid State Lighting for Incandescent Replacement—DimmingNEMA SSL 6-2010
Solid State Lighting—Definitions for Functional and Decorative ApplicationsNEMA LSD 51-2009
Solid State Lighting—The Need for a New Generation of Sockets and InterconnectsNEMA LSD 44-2009
Solvent-Cementing Joints for PVC Rigid Nonmetallic Conduit, Duct and FittingsNEMA PRP 2-2009
Sound Level Prediction for Installed Rotating Electrical MachinesNEMA MG 3-1974 (R1995, R2000, R2006)
Specialty Transformers (Except General Purpose Type)ST 1-1988 (R1994, R1997)
Standard for Aerospace and Industrial Electrical CableANSI/NEMA WC 27500-2005
Standard for Control, Thermocouple Extension and Instrumentation CablesANSI/NEMA WC 57-2004/ICEA S-73-532
Standard for Non-Shielded Cables Rated 2,001-5,000 V for Use in the Distribution of Electric EnergyANSI/NEMA WC 71-1999/ICEA S-96-659-1999
Standard for Real-Time Display of Thermal and Mechanical Acoustic Output Indices on Diagnostic Ultrasound Equipment, Revision 2NEMA UD 3-2004 (R2009)
Standard for the Labeling of Distribution Transformer EfficiencyNEMA TP 3-2000
Standard for Uninsulated Conductors Used in Electrical and Electronic ApplicationsANSI/NEMA WC 67-2005
Standard on Common Public Transportation (CPT) ObjectsNTCIP 1401:2000
Standard on Control Center (CC) ObjectsNTCIP 1407:2000
Standard on Fare Collection (FC) Business Area ObjectsNTCIP 1408:2001
Standard on Incident Management (IM) ObjectsNTCIP 1402:2000
Standard on On-Board (OB) ObjectsNTCIP 1406:2000
Standard on Passenger Information (PI) ObjectsNTCIP 1403:2000
Standard on Scheduling/Runcutting (SCH) ObjectsNTCIP 1404:2000
Standard on Spatial Representation (SP) ObjectsNTCIP 1405:2000
Standard Test Method for Measuring the Energy Consumption of Distribution TransformersNEMA TP 2-2005
Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation and Portable Cables for TestANSI/NEMA WC 53-2008/ICEA T-27-581
Steam Turbines for Mechanical Drive ServiceNEMA SM 23-1991 (R1997, R2002)
Steel Armor and Associated Coverings for Impregnated Paper Insulated Cables (ICEA S-67-401 Fifth Edition)WC 2-1980 (R1991, R1998)/ICEA S-67-401 5th Edition
Straight Flange Magnet Wire Plastic Spools/ReelsNEMA MW 755-1996
Structure and Identification of Management Information (SMI)NTCIP 8004 v02
Surge ArrestersNEMA LA 1-2009
Tapered Flange Magnet Wire Plastic Spools/ReelsNEMA MW 760-1996
TCIP Framework StandardNTCIP 1400:2000
Test Procedure for Compatibility of Hearing Aids and Ultrasonic Lighting Control DevicesNEMA LC 1-2007
Test Procedures for Magnet Wire Plastic Spools/ReelsNEMA MW 700-1997
Test Standard for the Determination of the Limiting Spatial Resolution of X-Ray Image Intensifier SystemsNEMA XR 11-1993 (R1999)
Test Standard for the Determination of the Radial Image Distortion of an X-Ray Image Intensifier (XRII) SystemNEMA XR 18-1993 (R1999)
Test Standard for the Determination of the System Contrast Ratio (SCR) and the System Veiling Glare Index (SVGI) of an X-Ray Image Intensifier (XRII) SystemNEMA XR 16-1991 (R1996, R2001)
Test Standard for the Determination of the Visible Entrance Field Size of an X-Ray Image Intensifier (XRII) SystemNEMA XR 15-1991 (R1996, R2001)
Test Standard for the Measurement of the Image Signal Uniformity of an X-Ray Image Intensifier (XRII) SystemNEMA XR 17-1993 (R1999)
Testing and Conformity Assessment Documentation within NTCIP Standards PublicationsNTCIP 8007 v01
The Evolution of Aluminum Conductors Used for Building Wire and Cable[No Document Number]
The Grounding System That Works—Steel Conduit (Electrical Metallic Tubing, Intermediate Metal Conduit and Galvanized Rigid)[No Document Number]
The International Electrotechnical Commission and the U.S. National Committee of the IEC (USNC/IEC)—A Practical Guide[No Document Number]
The Labeling of Mercury-Containing Lamps[No Document Number]
The NTCIP GuideNTCIP 9001 v04
The Strengths and Potentials of Metal Halide Lighting SystemsNEMA LSD 54-2010
The Strengths of an Effective Electrical Safety System[No Document Number]
Thermoplastic-Insulated Wire & Cable for the Transmission & Distribution of Electrical EnergyWC 5-1992
Torquing Devices for Electrodes—Selection Through DisposalNEMA CG 3.2-1998
Traffic Control Systems (Not Recommended for New Designs)NEMA TS 1-1989 (R1994, R2000, R2005, R2010)
Traffic Controller Assemblies with NTCIP Requirements—Version 02.06NEMA TS 2-2003 (R2008)
Training Manual on Fire Alarm SystemsNEMA SB 2-2010
Transfer Impedance TestingANSI/NEMA WC 61-2005
Transformers, Regulators and ReactorsNEMA TR 1-1993 (R2000)
Transportation Management Protocols (TMP)NTCIP 1103 v02
Transportation Transport ProfileNTCIP 2201:2003
Trivial File Transfer Protocol Application ProfileNTCIP 2302:2001
Tungsten Halogen (TH) Lamps (Bulbs): Ultraviolet, Rupture and High Temperature RisksNEMA LSD 1-2003 (R2011)
Type 2 Motor Starter Protection Fuse Guide[No Document Number]
Typical Proximity Switch SpecificationsNEMA ICS 5, Annex B-2002 (R2008)
Ultraviolet Radiation (UV) from Fluorescent LampsNEMA LSD 7-1999
UN2911 Labeling and Transportation of Lamps Containing Radioactive SubstancesNEMA LSD 41-2007
Uncoated Treated Fiberglass SleevingNEMA TF 2-1993 (R2000, R2005)
Undercarpet Power Distribution SystemsNEMA UC 2-1993 (R2000, R2005, R2010)
Unified Customer Labeling for Magnet Wire ProductsNEMA MW 770-1997 (R1998)
Uninterruptible Power Systems (UPS)—Specification and Performance VerificationNEMA PE 1-2003
Untreated Mica Paper Used for Electrical InsulationNEMA FI 2-1992 (R1999, R2004)
User Guide to Product Specifications for Electrical Building Wire and Cable[No Document Number]
User Guide to Product Specifications for Metal Electrical Conduit and TubingNEMA 5RN 2189-2003
User's Manual for the Installation of Underground Corrugated Coilable Plastic Utility Duct (CCD)NEMA TCB 3-2001 (R2009)
Utility-Type Battery ChargersNEMA PE 5-1997 (R2003)
Varnished Cloth Insulated Wire and Cable for the Transmission and Distribution of Electrical EnergyWC 4-1988/ICEA S-65-375 3rd Ed. (R1993)
White Paper Guide on Qualification Testing of Transfer Switches[No Document Number]
White Paper on Outdoor Lighting Issues and Quality Lighting ApplicationsNEMA LSD 11-2010
Wire Selection Guidelines for Wires Rated at 200° to 450°CNEMA WC 73-2000 (R2005)
Wiring Devices—Dimensional SpecificationsANSI/NEMA WD 6-2002 (R2008)
Wiring Requirements for T8 Lamps with Instant-Start BallastsNEMA LSD 2-2012