1 - 1000-Watt, M47 Single-Ended Metal Halide Lamps - ANSI C78.1376-1996
- 100-Watt, M90 Single-Ended Metal Halide Lamps - ANSI C78.1382-1996
- 1500-Watt, M48 Single-Ended Metal-Halide Lamps - ANSI C78.1379-1997
- 150-Watt, M102 Single-Ended Metal-Halide Lamps - ANSI C78.1384-1997
- 160-Watt, 120-Volt B87 Self-Ballasted Mercury Halide Lamps - ANSI C78.1342-1990 (R1995) (ANSI copyright)
- 175-Watt, M57 Single-Ended Metal Halide Lamps - ANSI C78.1377-1996
- 250-Watt, M58 Single-Ended Metal Halide Lamps - ANSI C78.1378-1997
- 3.0 kHz Insulation Continuity Proof Testing of Wire and Cable - NEMA WC 56-1986 (R1993, R2000, R2005, R2012)
- 34 W Fluorescent Lamps and High-Frequency Electronic Ballasts - NEMA LSD 5-2009
- 400-Watt, M59 Single-Ended Metal Halide Lamps - ANSI C78.1375-1996
- 450W Self-Ballasted Mercury Lamps - ANSI C78.1340-1990 (R1995) (ANSI copyright)
- 50-Watt, M110 Single-Ended Metal-Halide Lamps - ANSI C78.1374-1996
- 5-46 kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy - ANSI/NEMA WC 74/ICEA S-93-639-2012
- 70-Watt, M98 Single-Ended Metal Halide Lamps - ANSI C78.1372-1997
- 750-Watt, 120-Volt Self-Ballasted Mercury Lamps - ANSI C78.1341-1990 (R1995) (ANSI copyright)
- A Brief Comparison of NEMA 250 and IEC 60529
- A Guide for the Safe Use of Remote Illumination Systems Equipment, Including a Glossary of Definitions - NEMA LSD 10-2000
- A Lighting Systems Division Information Bulletin: Changes to the 2005 NEC Will Impact Future Metal Halide Systems Options - NEMA LSD 31-2005
- A Reasoned Approach to Solving Solderability Problems with Tin-Coated and Nickel-Coated Stranded Conductors in High-Performance Wire and Cable Applications - NEMA WC 65-1995 (R2003)
- AC Overload Test for Film Insulated Magnet Wire - NEMA MW 790-2000
- AC Transfer Equipment, Part 2: Static AC Transfer Equipment - NEMA ICS 10-2005, Part 2
- AC Vacuum-Break Magnetic Controllers Rated 1,500 V AC - NEMA ICS 2-2002, Part 9 (R2007)
- Access Controls for Computed Tomography: Identification, Interlocks, and Logs - NEMA XR 26-2012
- Acoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging (MRI) Devices - NEMA MS 4-2010
- Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3 - NEMA UD 2-2004 (R2009)
- Additional Requirements for Proximity Switches Suitable for Use in Strong Magnetic Fields - NEMA ICS 5, Annex E-2002 (R2008)
- Adjustable Speed Drives - NEMA ICS 7-2006
- Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements-Rating Specifications for Low Voltage Adjustable-Speed DC Power Drive Systems - NEMA ICS 61800-1-2002 (R2007)
- Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements-Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive Systems - NEMA ICS 61800-2-2005
- Adjustable Speed Electrical Power Drive Systems, Part 4: General Requirements-Rating Specifications for AC Power Drive Systems Above 1,000 V AC and Not Exceeding 35 kV - NEMA ICS 61800-4-2004
- Air Infiltration Ratings for Recessed Luminaires - NEMA LSD 58-2010
- Alternating Current High Voltage Circuit Breakers - NEMA SG 4-2009 (R2013)
- Alternatives to Mercury-Containing Light Sources
- American National Standard Criteria for Safety Symbols - ANSI Z535.3-2011
- American National Standard Electric Lamps: PAR and R Shapes - ANSI_ANSLG C78.21-2011
- American National Standard Electric Lamps: Specifications for Mercury Lamps - ANSI_ANSLG C78.40-2011
- American National Standard for 1.65 in. (42 mm) Integral Reflector, Rim Reference Projection Lamps with GX5.3 or GY5.3 Bases-Dimensions and Centering Systems - ANSI C78.1417-1997
- American National Standard for 2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference Tungsten Halogen (TH) Large-Screen Projection Lamps with GX5.3 Bases - ANSI C78.1433-2001
- American National Standard for 2 in. (51 mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 Bases - ANSI C78.24-2001
- American National Standard for AC High Voltage Power Vacuum Interrupters-Safety Requirements for X-Radiation Limits - ANSI C37.85-2002 (R2010)
- American National Standard for Arc-Welding Equipment-Part 1: Welding Power Sources - ANSI/IEC 60974-1-2008
- American National Standard for Arc-Welding Equipment-Part 11: Electrode Holders - ANSI/IEC 60974-11-2009
- American National Standard for Arc-Welding Equipment-Part 12: Coupling Devices for Welding Cables - ANSI/IEC 60974-12-2009
- American National Standard for Arc-Welding Equipment-Part 2: Liquid Cooling Systems - ANSI/IEC 60974-2-2009
- American National Standard for Arc-Welding Equipment-Part 3: Arc Striking and Stabilizing Devices - ANSI/IEC 60974-3-2009
- American National Standard for Arc-Welding Equipment-Part 5: Wire Feeders - ANSI/IEC 60974-5-2009
- American National Standard for Arc-Welding Equipment-Part 7: Torches - ANSI/IEC 60974-7-2009
- American National Standard for Arc-Welding Equipment-Part 8: Gas Consoles for Welding and Plasma Cutting Systems - ANSI/IEC 60974-8-2008
- American National Standard for Composite Insulators-Tests Methods - ANSI/NEMA C29.11-2012
- American National Standard for Condensing Dichroic Coated Integral Reflector Side-Pin Tungsten Halogen (TH) Projection Lamps with GX7.9 Bases - ANSI C78.1434-2001
1
|
|