Facebook  |  Twitter  |  Google Plus  |  LinkedIn  |  Print

Building Systems Standards




1   2   NEXT >

[No Document Number]A Brief Comparison of NEMA 250 and IEC 60529
[No Document Number]Annular Space Protection of Openings Created by Penetrations of Tubular Steel Conduit, A Review of UL Special Service Investigation, File NC 546, Project 90NK11650
[No Document Number]Application Guide for Isolated Ground Wiring Devices
[No Document Number]Conduit-in-Casing Construction
[No Document Number]Evaluating Fire- and Heat-Damaged Electrical Equipment
[No Document Number]NEMA WD 6 Locking Plugs and Receptacles​​
[No Document Number]NEMA WD 6 Non-Locking Plugs and Receptacles
[No Document Number]Type 2 Motor Starter Protection Fuse Guide
[No Document Number]Use of Temporary Covers on Panelboards
ANSI C119.1-2011American National Standard for Electric Connectors-Sealed Insulated Underground Connector Systems Rated 600 V
ANSI C119.4-2011American National Standard for Electric Connectors-Connectors for Use Between Aluminum-to-Aluminum and Aluminum-to-Copper Conductors Designed for Normal Operation at or Below 93°C and Copper-to-Copper
ANSI C119.5-2009American National Standard for Electric Connectors-Insulation-Piercing Connector Systems, Rated 600 V or Less (Low Voltage Aerial Bundled Cables and Insulated and Non-Insulated Line Wires)
ANSI C12.7-2014American National Standard for Requirements for Watthour Meter Sockets
ANSI C37.50-2012American National Standard for Switchgear-Low Voltage AC Power Circuit Breakers Used in Enclosures-Test Procedures
ANSI C37.51-2003 (R2010)American National Standard for Switchgear-Metal-Enclosed Low Voltage AC Power Circuit Breaker Switchgear Assemblies-Conformance Test Procedures
ANSI C37.52-1974 (R1995, R2000)American National Standard for Test Procedures for Low-Voltage AC Power Circuit Protectors Used in Enclosures
ANSI C37.54-2002 (R2010)American National Standard for Indoor AC High Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear-Conformance Test Procedures
ANSI C37.55-2002 (R2010)American National Standard for Switchgear-Medium Voltage Metal-Clad Assemblies-Conformance Test Procedures
ANSI C37.57-2003 (R2010)American National Standard for Switchgear-Metal-Enclosed Interrupter Switchgear Assemblies-Conformance Testing
ANSI C37.58-2003 (R2010)American National Standard for Switchgear-Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear-Conformance Test Procedures
ANSI C80.1-2005American National Standard for Electric Rigid Steel Conduit (ERSC)
ANSI C80.3-2005American National Standard for Steel Electrical Metallic Tubing (EMT)
ANSI C80.5-2005American National Standard for Electrical Rigid Aluminum Conduit (ERAC)
ANSI C80.6-2005American National Standard for Intermediate Metal Conduit (EIMC)
ANSI/IEC 60529-2004 (R2011)American National Standard for Degrees of Protection Provided by Enclosures (IP Code) (Identical National Adoption)
ANSI/NEMA AB 3-2013Molded-Case Circuit Breakers and Their Application
ANSI/NEMA AB 4-2009Guidelines for Inspection and Preventive Maintenance of Molded-Case Circuit Breakers Used in Commercial and Industrial Applications
ANSI/NEMA FB 11-2000Plugs, Receptacles and Connectors of the Pin-and-Sleeve Type for Hazardous Locations
ANSI/NEMA FB 1-2014Fittings, Cast Metal Boxes and Conduit Bodies for Conduit, Electrical Metallic Tubing (EMT) and Cable
ANSI/NEMA KS 2-2013Distribution Equipment Switch Application Guide, A User's Reference
ANSI/NEMA OS 1-2013​​Sheet-Steel Outlet Boxes, Device Boxes, Covers and Box Supports
ANSI/NEMA OS 2-2013​Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports
ANSI/NEMA PB 1.1-2013General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less
ANSI/NEMA PB 2.1-2013General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less
ANSI/NEMA WD 6-2012Wiring Devices-Dimensional Specifications
NEMA 250-2014Enclosures for Electrical Equipment (1,000 V Maximum)
NEMA 410-2011Performance Testing for Lighting Controls and Switching Devices with Electronic Drivers and Discharge Ballasts
NEMA 5RN 2189-2003User Guide to Product Specifications for Metal Electrical Conduit and Tubing
NEMA ABP 1-2010Selective Coordination
NEMA ABP 2-2011Recommendations on AFCI / Home Electrical Product Compatibility
NEMA ABP 6-2015 What is the Purpose of a Molded Case Circuit Breaker?
NEMA ABP 7-2015Engineering Series Ratings Is It Practical?
NEMA BU 1.1-2005 (Spanish)Instrucciones Generales para el Manejo, Instalacion, Operacion y Mantenimiento de Electroductos Hasta 600 V Nominales o Menos
NEMA BU 1.1-2010General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less
NEMA BU 1.2-2002 (R2008, R2013)Application Information for Busway Rated 600 V or Less
NEMA CG 1-2013Manufactured Graphite/Carbon Electrodes
NEMA CPSP 1-2015Supply Chain Best Practices
NEMA FB 2.10-2013Selection and Installation Guidelines for Fittings for Use with Non-Flexible Electrical Metal Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit and Electrical Metallic Tubing)
NEMA FB 2.20-2014Selection and Installation Guidelines for Fittings for Use with Flexible Electrical Conduit and Cable
NEMA FG 1-1993Fiberglass Cable Tray Systems

1   2   NEXT >

 

Copyright © NEMA. All rights reserved. (703) 841-3200, 1300 North 17th Street, Suite 900, Arlington, Virginia 22209