Facebook  |  Twitter  |  Google Plus  |  LinkedIn  |  Print

All Standards (One Page)


ANSI C119.0-2015Testing Methods and Equipment Common to the ANSI C119 Family of Standards
ANSI C119.1-2011American National Standard for Electric Connectors-Sealed Insulated Underground Connector Systems Rated 600 V
ANSI C119.4-2011American National Standard for Electric Connectors-Connectors for Use Between Aluminum-to-Aluminum and Aluminum-to-Copper Conductors Designed for Normal Operation at or Below 93°C and Copper-to-Copper
ANSI C119.5-2009American National Standard for Electric Connectors-Insulation-Piercing Connector Systems, Rated 600 V or Less (Low Voltage Aerial Bundled Cables and Insulated and Non-Insulated Line Wires)
ANSI C119.6-2011American National Standard for Electric Connectors-Non-Sealed, Multiport Connector Systems Rated 600 V or Less for Aluminum and Copper Conductors
ANSI C12.10-2011American National Standard for Physical Aspects of Watthour Meters-Safety Standard
ANSI C12.11-2006 (R2014)American National Standard for Instrument Transformers for Revenue Metering, 10 kV BIL through 350 kV BIL (0.6 kV NSV through 69 kV NSV)
ANSI C12.1-2014American National Standard for Electric Meters-Code for Electricity Metering
ANSI C12.18-2006 American National Standard for Protocol Specification for ANSI Type 2 Optical Port
ANSI C12.19-2012American National Standard for Utility Industry End Device Data Tables
ANSI C12.20-2010American National Standard for Electricity Meters-0.2 and 0.5 Accuracy Classes
ANSI C12.21-2006American National Standard for Protocol Specification for Telephone Modem Communication
ANSI C12.22-2012American National Standard for Protocol Specification for Interfacing to Data Communication Networks
ANSI C12.4-1984 (R2002, R2011)American National Standard for Registers-Mechanical Demand
ANSI C12.5-1978 (R2002, R2012)American National Standard for Thermal Demand Meters
ANSI C12.6-1987 (R2002, R2012)American National Standard for Phase-Shifting Devices Used in Metering, Marking and Arrangement of Terminals
ANSI C12.7-2014American National Standard for Requirements for Watthour Meter Sockets
ANSI C12.8-1981 (R2002, R2012)American National Standard for Test Blocks and Cabinets for Installation of Self-Contained A-Base Watthour Meters
ANSI C12.9-2014American National Standard for Test Switches and Plugs for Transformer-Rated Meters
ANSI C136.10-2010American National Standard for Roadway and Area Lighting Equipment-Locking-Type Photocontrol Devices and Mating Receptacles-Physical and Electrical Interchangeability and Testing
ANSI C136.11-2011American National Standard for Roadway and Area Lighting Equipment-Multiple Sockets
ANSI C136.1-2012American National Standard for Roadway and Area Lighting Equipment-Filament Lamps-A Guide for Selection
ANSI C136.12-2014American National Standard for Roadway and Area Lighting Equipment-Mercury Lamps-Guide for Selection
ANSI C136.13-2014American National Standard for Roadway and Area Lighting Equipment-Metal Brackets for Wood Poles
ANSI C136.14-2014American National Standard for Roadway and Area Lighting Equipment-Elliptically Shaped, Enclosed Side-Mounted Luminaires
ANSI C136.15-2015American National Standard for Roadway and Area Lighting Equipment-Luminaire Field Identification
ANSI C136.16-2014American National Standard for Roadway and Area Lighting Equipment-Enclosed, Post Top-Mounted Luminaires
ANSI C136.17-2005 (R2010)American National Standard for Roadway and Area Lighting Equipment-Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity Discharge Lamps-Mechanical Interchangeability of Refractors
ANSI C136.18-2006 (R2010)American National Standard for Roadway and Area Lighting Equipment-High-Mast Side-Mounted Luminaires for Horizontal- or Vertical-Burning High-Intensity Discharge Lamps
ANSI C136.19-2011American National Standard for Roadway and Area Lighting Equipment-High-Pressure Sodium (HPS) and Retrofit HPS Lamps for Mercury Ballasts-Guide for Selection
ANSI C136.20-2012American National Standard for Roadway and Area Lighting Equipment-Fiber-Reinforced Composite (FRC) Lighting Poles
ANSI C136.21-2014American National Standard for Roadway and Area Lighting Equipment-Vertical Tenons Used with Post Top-Mounted Luminaires
ANSI C136.2-2015American National Standard for Roadway and Area Lighting Equipment-Dielectric Withstand and Electrical Transient Immunity Requirements
ANSI C136.22-2004 (R2009, R2014)American National Standard for Roadway and Area Lighting Equipment-Internal Labeling of Luminaires
ANSI C136.23-2012American National Standard for Roadway and Area Lighting Equipment-Enclosed Architectural Luminaires
ANSI C136.24-2004 (R2010)American National Standard for Roadway and Area Lighting Equipment-Non-Locking (Button)-Type Photocontrols
ANSI C136.25-2013American National Standard for Roadway and Area Lighting Equipment-Ingress Protection (Resistance to Dust, Solid Objects and Moisture) for Luminaire Enclosures
ANSI C136.26-2010 (R2015)American National Standard for Roadway and Area Lighting Equipment-Troubleshooting Guide for High-Intensity Discharge (HID) Luminaires
ANSI C136.27-2012American National Standard for Roadway and Area Lighting Equipment-Tunnel Lighting and Underpass Luminaires
ANSI C136.28-2006 (R2011)American National Standard for Roadway and Area Lighting Equipment-Glass Lenses Used in Luminaires
ANSI C136.29-2011American National Standard for Roadway and Area Lighting Equipment-Metal Halide Lamps-Guide for Selection
ANSI C136.30-2015American National Standard for Roadway and Area Lighting Equipment—Pole Vibration
ANSI C136.31-2010American National Standard for Roadway and Area Lighting Equipment-Luminaire Vibration
ANSI C136.3-2014American National Standard for Roadway and Area Lighting Equipment-Luminaire Attachments
ANSI C136.32-2012American National Standard for Roadway and Area Lighting Equipment-Enclosed Setback Luminaires and Directional Floodlights for High-Intensity Discharge (HID) Lamps
ANSI C136.34-2014American National Standard for Roadway and Area Lighting Equipment-Vandal Shields for Roadway and Area Lighting Luminaires
ANSI C136.35-2009 (R2014)American National Standard for Roadway and Area Lighting Equipment-Luminaire Electrical Ancillary Devices (LEAD)
ANSI C136.36A-2010American National Standard for Roadway and Area Lighting Equipment-Aluminum Lighting Poles
ANSI C136.37-2011American National Standard for Solid State Light Sources Used in Roadway and Area Lighting
ANSI C136.38-2015American National Standard for Roadway and Area Lighting Equipment-Induction Lighting
ANSI C136.40-2014American National Standard for Roadway and Area Lighting Equipment-Solar Lighting Systems
ANSI C136.41-2013American National Standard for Roadway and Area Lighting Equipment–Dimming Control Between an External Locking Type Photocontrol and Ballast or Driver
ANSI C136.4-2003 (R2013)American National Standard for Roadway and Area Lighting Equipment-Series Sockets and Series-Socket Receptacles
ANSI C136.46-2013American National Standard For Roadway and Area Lighting Equipment—Concrete Lighting Poles
ANSI C136.47-2010 (R2015)American National Standard for Roadway and Area Lighting Equipment-Steel Roadway and Area Lighting Poles
ANSI C136.49-2016American National Standard for Roadway and Area Lighting Equipment—Plasma Lighting
ANSI C136.5-2003 (R2013)American National Standard for Roadway and Area Lighting Equipment-Film Cutouts
ANSI C136.6-2004 (R2012)American National Standard for Roadway and Area Lighting Equipment-Metal Heads and Reflector Assemblies-Mechanical and Optical Interchangeability
ANSI C136.9-2003 (R2012)American National Standard for Roadway and Area Lighting Equipment-Socket Support Assemblies for Metal Heads-Mechanical Interchangeability
ANSI C18.1M, Part 1-2015American National Standard for Portable Primary Cells and Batteries with Aqueous Electrolyte-General and Specifications
ANSI C18.1M, Part 2-2011American National Standard for Portable Primary Cells and Batteries with Aqueous Electrolyte-Safety Standard
ANSI C18.2M, Part 1-2013American National Standard for Portable Rechargeable Cells and Batteries-General and Specifications
ANSI C18.2M, Part 2-2014American National Standard for Portable Rechargeable Cells and Batteries-Safety Standard
ANSI C18.3M, Part 1-2013American National Standard for Portable Lithium Primary Cells and Batteries-General and Specifications
ANSI C18.3M, Part 2-2011American National Standard for Portable Lithium Primary Cells and Batteries-Safety Standard
ANSI C18.4M-2015American National Standard for Portable Cells and Batteries—Environmental
ANSI C37.50-2012American National Standard for Switchgear-Low Voltage AC Power Circuit Breakers Used in Enclosures-Test Procedures
ANSI C37.51-2003 (R2010)American National Standard for Switchgear-Metal-Enclosed Low Voltage AC Power Circuit Breaker Switchgear Assemblies-Conformance Test Procedures
ANSI C37.51a-2010American National Standard for Switchgear-Metal-Enclosed Low Voltage AC Power Circuit Breaker Switchgear Assemblies-Conformance Test Procedures-Amendment 1 Short-Time Withstand Current Tests
ANSI C37.54-2002 (R2010)American National Standard for Indoor AC High Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear-Conformance Test Procedures
ANSI C37.55-2002 (R2010)American National Standard for Switchgear-Medium Voltage Metal-Clad Assemblies-Conformance Test Procedures
ANSI C37.57-2003 (R2010)American National Standard for Switchgear-Metal-Enclosed Interrupter Switchgear Assemblies-Conformance Testing
ANSI C37.58-2003 (R2010)American National Standard for Switchgear-Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear-Conformance Test Procedures
ANSI C37.85-2002 (R2010)American National Standard for AC High Voltage Power Vacuum Interrupters-Safety Requirements for X-Radiation Limits
ANSI C62.61-1993American National Standard for Gas Tube Surge Arresters on Wire Line Telephone Circuits
ANSI C78.1381-1998American National Standard for Electric Lamps-70 W, M85 Double-Ended Metal Halide Lamps
ANSI C78.1401-2004 (R2009, R2016)American National Standard for Electric Lamps-Dimensions for Projection Lamps-Double-Contact, Medium Ring (Special B), Base-up Type
ANSI C78.1402-2004​American National Standard for Electric Lamps-Four-Pin, Prefocus, Base-Down Type
ANSI C78.1403-1997American National Standard for Electric Lamps-Tungsten Halogen (TH) Lamps with G6.35, GX6.35 and GY6.35 Bases
ANSI C78.1406-2004American National Standard for Electric Lamps-P28 Single-Contact Medium Prefocus-Based Projection Lamps for Base-Down Operation-Dimensions
ANSI C78.1408-2004 (R2008, R2015)American National Standard for Electric Lamps-CBA Projection Lamp
ANSI C78.1413-2001American National Standard for Dimensions and Centering Systems for Projection Lamps-51 mm (2 in.) Integral Reflector, Rim Reference Lamps with GX5.3, GY5.3 and GU5.3 Bases
ANSI C78.1417-1997American National Standard for 1.65 in. (42 mm) Integral Reflector, Rim Reference Projection Lamps with GX5.3 or GY5.3 Bases-Dimensions and Centering Systems
ANSI C78.1420-2001American National Standard for Microfilm Projection Lamps-2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference Tungsten Halogen Lamps with GX5.3 Bases
ANSI C78.1421-2002American National Standard for Dimensions and Centering Systems for Projection Lamps-35 mm Integral Reflector, Rim Reference Lamps with GZ4 Bases
ANSI C78.1430-1997 (R2009, R2016)American National Standard for Electric Lamps-Slide Projector Lamps, Condensing, Dichroic, 1.65-in.(42 mm), Integral Reflector, Rim Reference Tungsten-Halogen Lamps with GX5.3 Bases
ANSI C78.1431-1997 (R2016)American National Standard for Electric Lamps-Slide Projector Lamps, Condensing, Dichroic, Two-inch (51 mm), Integral Reflector, Rim Reference Tungsten-Halogen Lamps with GY 5.3 Bases
ANSI C78.1432-1997American National Standard for Tungsten Halogen (TH) Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5 mm Nominal Light Center Length
ANSI C78.1433-2001American National Standard for 2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference Tungsten Halogen (TH) Large-Screen Projection Lamps with GX5.3 Bases
ANSI C78.1434-2001American National Standard for Condensing Dichroic Coated Integral Reflector Side-Pin Tungsten Halogen (TH) Projection Lamps with GX7.9 Bases
ANSI C78.1435-2002American National Standard for Projection Lamps-Tungsten Halogen Lamps with G5.3 Bases
ANSI C78.1450-1983 (R2002)American National Standard for Projection Lamps, Incandescent-Method for Life Testing
ANSI C78.1451-2002American National Standard for Electric Lamps-Use of Protective Shields with Tungsten Halogen (TH) Lamps-Cautionary Notice
ANSI C78.1452-2004 (R2008, R2015)American National Standard for Electric Lamps-Projection Lamps-Vocabulary
ANSI C78.1460-2004 (R2015)American National Standard for Electric Lamps-Single-Ended Tungsten-Halogen Lamps GZ9.5 Base, T6 Bulb, 36.5mm LCL, 76.2mm MOL with Proximity Reflector
ANSI C78.1500-2001American National Standard for Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 89 mm (3½ in.)
ANSI C78.1501-2001American National Standard for Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 63.5 mm (2½ in.)
ANSI C78.1503-2001American National Standard for Tungsten Halogen (TH) Lamps with G9.5 Bases and 60.5 mm Light Center Length (LCL)
ANSI C78.1504-2001American National Standard for Tungsten Halogen (TH) Lamps with P28 Bases and 55.5 mm Light Center Length (LCL)
ANSI C78.1505-2001American National Standard for Tungsten Halogen (TH) Lamps with G38 Bases and 127 mm Light Center Length (LCL)
ANSI C78.180-2003 (R2016)American National Standard for Electric Lamps-Specifications for Fluorescent Lamp Starters
ANSI C78.20-2003 (R2007, R2015)American National Standard for Electric Lamps-A, G, PS, and Similar Shapes with E26 Medium Screw Bases
ANSI C78.21-2011American National Standard for Electric Lamps-PAR and R Shapes
ANSI C78.22-1995 (R2003)American National Standard for Incandescent Lamps-A, G, PS and Similar Shapes with E39 Mogul Screw Bases
ANSI C78.23-1995 (R2003)American National Standard for Incandescent Lamps-Miscellaneous Types
ANSI C78.24-2001American National Standard for 2 in. (51 mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 Bases
ANSI C78.260-2002American National Standard for Tubular Tungsten Halogen (TH) Lamps-Physical Characteristics
ANSI C78.261-1977 (R2007)American National Standard for Specification for Tubular Incandescent Infrared Lamps
ANSI C78.30-1997American National Standard for Electric Lamps-Procedure for Use in Preparation of Lamp Space Drawings
ANSI C78.357-2010American National Standard for Incandescent Lamps Tungsten Halogen Lamps (Non-Vehicle)
ANSI C78.370.390-2002American National Standard for Electric Lamps-Amendments to ANSI C78.370-1997 and ANSI C78.390-1998
ANSI C78.370-1997 (R2003)American National Standard for Method of Designation for Electric Lamps-Photographic, Stage and Studio
ANSI C78.374-2015Light-Emitting Diode Package Specification Sheet for General Illumination Applications
ANSI C78.375A-2014American National Standard for Electric Lamps-Fluorescent Lamps-Guide for Electrical Measures
ANSI C78.376-2014American National Standard for Electric Lamps-Specifications for the Chromaticity of Fluorescent Lamps
ANSI C78.377-2015American National Standard for Electric Lamps-Specifications for the Chromaticity of Solid State Lighting (SSL) Products
ANSI C78.380-2007American National Standard for Electric Lamps-High-Intensity Discharge (HID)-Method of Designation
ANSI C78.385-1961 (S2016)​American National Standard for Electric Lamps-Methods of Measurement of Glow Lamps
ANSI C78.389-2004 (R2009)American National Standard for Electric Lamps-High-Intensity Discharge (HID)-Methods of Measuring Characteristics
ANSI C78.390-2006 (R2015) American National Standard for Electric Lamps-Miniature and Sealed-Beam Incandescent Lamps-Method of Designation
ANSI C78.391-2004 (R2009, R2016)American National Standard for Electric Lamps-Characteristics of Subminiature Lamps of T1 and T1-3/4 Shapes
ANSI C78.40-2011American National Standard for Electric Lamps-Specifications for Mercury Lamps
ANSI C78.41-2006American National Standard for Electric Lamps-Guidelines for Low-Pressure Sodium (LPS) Lamps
ANSI C78.42-2009 (R2016) American National Standard for Electric Lamps-High-Pressure Sodium (HPS) Lamps
ANSI C78.43-2013American National Standard for Electric Lamps-Single-Ended Metal Halide Lamps
ANSI C78.44-2008American National Standard for Electric Lamps-Double-Ended Metal Halide Lamps
ANSI C78.45-2007 American National Standard for Electric Lamps-Self-Ballasted Mercury Lamps
ANSI C78.50-2014American National Standard for Electric Lamps–Assigned LED Lamp Codes
ANSI C78.5-2003 (R2008, R2015)American National Standard for Electric Lamps-Specifications for Performance of Self-ballasted Compact Fluorescent Lamps
ANSI C78.60360-2002 (S2016)American National Standard for Electric Lamps— Standard Method of Measurement of Lamp Cap Temperature Rise
ANSI C78.60432:1-2007American National Standard for Electric Lamps-Incandescent Lamps-Safety Specifications, Part 1 Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes
ANSI C78.60432:2-2007American National Standard for Electric Lamps-Safety Specifications, Part 2 Tungsten Halogen (TH) Lamps for Domestic and Similar General Lighting Purposes
ANSI C78.60432:3-2007American National Standard for Electric Lamps-Incandescent Lamps-Safety Specifications, Part 3 Tungsten Halogen (TH) Lamps (Non-Vehicle)
ANSI C78.79-2014American National Standard for Electric Lamps–Nomenclature for Envelope Shapes Intended for Use with Electric Lamps
ANSI C78.81-2014American National Standard for Electric Lamps-Double-Capped Fluorescent Lamps-Dimensional and Electrical Characteristics
ANSI C78.901-2014American National Standard for Electric Lamps-Single-Based Fluorescent Lamps-Dimensional and Electrical Characteristics
ANSI C78.LL 1256-2003 (R2008, R2015)American National Standard for Electric Lamps-Procedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure
ANSI C78.LL 3-2003 (R2008, R2015)American National Standard for Electric Lamps-Procedures for High Intensity Discharge Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure
ANSI C80.1-2015American National Standard for Electric Rigid Steel Conduit
ANSI C80.3-2015American National Standard for Electrical Metallic Tubing-Steel (EMT-S)
ANSI C80.5-2015ANSI C80.5-2015 American National Standard for Electrical Rigid Metal Conduit-Aluminum (ERMC-A)
ANSI C80.6-2005American National Standard for Intermediate Metal Conduit (EIMC)
ANSI C81.61-2016American National Standard for Electrical Lamp Bases-Specifications for Bases (Caps) for Electric Lamps
ANSI C81.62-2009 (R2014)American National Standard for Electric Lampholders
ANSI C81.63-2007 (R2014)American National Standard for Gauges for Electric Lamp Bases and Lampholders
ANSI C81.64-2005 (R2014)American National Standard-Guidelines and General Information for Electrical Lamp Bases, Lampholders and Gauges
ANSI C82.11-2011American National Standard for Lamp Ballasts-High Frequency Fluorescent Lamp Ballasts
ANSI C82.1-2004 (R2008, R2015) American National Standard for Lamp Ballasts-Line Frequency Fluorescent Lamp Ballasts
ANSI C82.12-1999American National Standard for Lamp Ballasts-Fluorescent Adapters
ANSI C82.13-2002​American National Standard for Lamp Ballasts-Definitions-for Fluorescent Lamps and Ballasts
ANSI C82.14-2006American National Standard for Lamp Ballasts-Low-Frequency Square Wave Electronic Ballasts-for Metal Halide Lamps
ANSI C82.16-2015American National Standard for Light-Emitting Diode Drivers—Methods of Measurement
ANSI C82.2-2002American National Standard for Lamp Ballasts-Method of Measurement of Fluorescent Lamp Ballasts
ANSI C82.3-2016American National Standard for Reference Ballasts for Fluorescent Lamps
ANSI C82.4-2002American National Standard for Lamp Ballasts-Ballasts for High-Intensity Discharge and Low-Pressure Sodium (LPS) Lamps (Multiple-Supply Type)
ANSI C82.5-2010American National Standard for Reference Ballasts—High-Intensity-Discharge and Low-Pressure Sodium Lamps
ANSI C82.6-2015American National Standard for Lamp Ballasts-Ballasts for High-Intensity Discharge (HID) Lamps-Methods ofMeasurement
ANSI C82.77-10-2014American National Standard for Lighting Equipment-Harmonic Emission Limits-Related Power Quality Requirements​
ANSI C82.77-2002American National Standard for Harmonic Emission Limits-Related Power Quality Requirements for Lighting Equipment
ANSI C82.77-5-2015American National Standard for Lighting Equipment—Voltage Surge Requirements
ANSI C82.9-2010American National Standard for Lamp Ballasts-High-Intensity Discharge (HID) and Low-Pressure Sodium (LPS) Lamps-Definitions
ANSI C84.1-2011American National Standard for Electric Power Systems and Equipment-Voltage Ratings (60 Hz)
ANSI Z535.1-2006 (R2011)American National Standard for Safety Colors
ANSI Z535.2-2011American National Standard for Environmental and Facility Safety Signs
ANSI Z535.3-2011American National Standard for Criteria for Safety Symbols
ANSI Z535.4-2011American National Standard for Product Safety Signs and Labels
ANSI Z535.5-2011American National Standard for Safety Tags and Barricade Tapes (for Temporary Hazards)
ANSI Z535.6-2011American National Standard for Product Safety Information in Product Manuals, Instructions and Other Collateral Materials
ANSI Z535-2011ANSI Z535 Color Chart
ANSI/IEC 60529-2004 (R2011)American National Standard for Degrees of Protection Provided by Enclosures (IP Code) (Identical National Adoption)
ANSI/IEC 60974-11-2009American National Standard for Arc-Welding Equipment-Part 11 Electrode Holders
ANSI/IEC 60974-1-2008American National Standard for Arc-Welding Equipment-Part 1 Welding Power Sources
ANSI/IEC 60974-12-2009American National Standard for Arc-Welding Equipment-Part 12 Coupling Devices for Welding Cables
ANSI/IEC 60974-2-2009American National Standard for Arc-Welding Equipment-Part 2 Liquid Cooling Systems
ANSI/IEC 60974-3-2009American National Standard for Arc-Welding Equipment-Part 3 Arc Striking and Stabilizing Devices
ANSI/IEC 60974-5-2009American National Standard for Arc-Welding Equipment-Part 5 Wire Feeders
ANSI/IEC 60974-7-2009American National Standard for Arc-Welding Equipment-Part 7 Torches
ANSI/IEC 60974-8-2008American National Standard for Arc-Welding Equipment-Part 8 Gas Consoles for Welding and Plasma Cutting Systems
ANSI/IEC 62430-2010Environmentally Conscious Design for Electrical and Electronic Products
ANSI/IEC C78.682-1997 (R2010)American National Standard for Electric Lamps-Standard Method of Measuring the Pinch Temperature of Quartz Tungsten-Halogen Lamps
ANSI/NEMA AB 3-2013Molded-Case Circuit Breakers and Their Application
ANSI/NEMA AB 4-2009Guidelines for Inspection and Preventive Maintenance of Molded-Case Circuit Breakers Used in Commercial and Industrial Applications
ANSI/NEMA C29.10-1989 (R2002, R2012)American National Standard for Wet-Process Porcelain Insulators-Indoor Apparatus Type
ANSI/NEMA C29.11-2012American National Standard for Composite Insulators-Tests​ Methods
ANSI/NEMA C29.1-1988 (R2002, R2012)American National Standard for Electrical Power Insulators-Test Methods
ANSI/NEMA C29.12-2013American National Standard for Composite Insulators-Transmission Suspension Type
ANSI/NEMA C29.13-2012American National Standard for Insulators-Composite-Distribution Deadend Type
ANSI/NEMA C29.17-2013American National Standard for Composite Insulators-Transmission Line Post Type
ANSI/NEMA C29.18-2013American National Standard for Composite Insulators-Distribution Line Post Type
ANSI/NEMA C29.2A-2013American National Standard for Insulators Wet Process Porcelain and Toughened Glass—Distribution Suspension Type
ANSI/NEMA C29.2B-2013American National Standard for Insulators-Wet Process Porcelain and Toughened Glass—Transmission Suspension Type
ANSI/NEMA C29.3-2015American National Standard for Wet-Process Porcelain Insulators-Spool Type
ANSI/NEMA C29.4-2015American National Standard for Wet-Process Porcelain Insulators-Strain Type
ANSI/NEMA C29.5-2015American National Standard for Wet-Process Porcelain Insulators-Low and Medium Voltage Types
ANSI/NEMA C29.6-2015American National Standard for Wet-Process Porcelain Insulators-High Voltage Pin Type
ANSI/NEMA C29.7-2015 American National Standard for Wet-Process Porcelain Insulators-High-Voltage Line-Post Type
ANSI/NEMA C29.8-1985 (R2002, R2012)American National Standard for Wet-Process Porcelain Insulators-Apparatus, Cap and Pin Type
ANSI/NEMA C29.9-1983 (R2002, R2012)American National Standard for Wet-Process Porcelain Insulators-Apparatus, Post Type
ANSI/NEMA C50.41-2012American National Standard for Polyphase Induction Motors for Power Generation Stations
ANSI/NEMA C78.LL 4-2003American National Standard for Procedures for Incandescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP)
ANSI/NEMA C93.1-1999American National Standard for Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVTs)
ANSI/NEMA CC 1-2009 (R2015)Electric Power Connectors for Substations
ANSI/NEMA FB 1-2014Fittings, Cast Metal Boxes and Conduit Bodies for Conduit, Electrical Metallic Tubing (EMT) and Cable
ANSI/NEMA FI 1-2004Manufactured Electrical Mica
ANSI/NEMA FI 3-2004Calendered Aramid Papers Used for Electrical Insulation
ANSI/NEMA GR 1-2007Grounding Rod Electrodes and Grounding Rod Electrode Couplings
ANSI/NEMA HP 3-2012Electrical and Electronic Polytetrafluoroethylene (PTFE) Insulated High-Temperature Hook-Up Wire, Types ET (250 V), E (600 V) and EE (1,000 V)
ANSI/NEMA HP 4-2012Electrical and Electronic Fluorinated Ethylene Propylene (FEP) Insulated High-Temperature Hook-Up Wire, Types KT (250 V), K (600 V) and KK (1,000 V)
ANSI/NEMA HP 5-2013Electrical and Electronic Crosslinked, Modified Polyethylene (XLPE) Insulated 125°C Hook-Up Wire, Types L (600 V), LL (1,000 V) and LX (3,000 V)
ANSI/NEMA HP 6-2013Electrical and Electronic Silicone and Silicone-Braided Insulated Hook-Up Wire Types S (600 V), ZHS (600 V), SS (1,000 V), ZHSS (1,000 V) and SSB Braided (1,000 V)
ANSI/NEMA HP 8-2013Electrical and Electronic Cross-Linked, Modified Low-Smoke Polyolefin (XLPO) Insulated Hook-Up Wire, Types LS (rated 105°C; 600 V), ZHDM (rated 90°C; 600 V), ZHDH (rated 90°C; 600 V), ZH (rated 125°C; 600 V), and ZHX (rated 125°C; 1000 V)
ANSI/NEMA HP 9-2014​​Electrical and Electronic Ethylene-Propylene Diene Elastomer (EPDM) Insulated Hook-Up Wire, Types EP (Rated 125°C; 600 V) and EPD (Rated 125°C; 5000 V)
ANSI/NEMA ICS 8-2011Application Guide for Industrial Control and Systems Crane and Hoist Controllers
ANSI/NEMA KS 2-2013Distribution Equipment Switch Application Guide, A User's Reference
ANSI/NEMA LD 3-2005High-Pressure Decorative Laminates (HPDL)
ANSI/NEMA MW 1000-2015Magnet Wire
ANSI/NEMA MW 1000-2015 SupplementSupplement to ANSI/NEMA MW 1000 Reference Requirements for Round Film-insulated Magnet Wire
ANSI/NEMA OS 1-2013​​Sheet-Steel Outlet Boxes, Device Boxes, Covers and Box Supports
ANSI/NEMA OS 2-2013​Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports
ANSI/NEMA PB 1.1-2013General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less
ANSI/NEMA PB 2.1-2013General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less
ANSI/NEMA SB 40-2015Communications Systems for Life Safety in Schools
ANSI/NEMA SG-IC 1-2013​Smart Grid Interoperable & Conformant (SG-IC) Testing and Certification Scheme Operator Guidelines
ANSI/NEMA SG-IPRM 1-2016Smart Grid Interoperability Process Reference Manual
ANSI/NEMA WC 27500-2015American National Standard for Aerospace and Industrial Electrical Cable
ANSI/NEMA WC 51/ICEA P-54-440-2009 (R2014)Ampacities of Cables Installed in Cable Trays
ANSI/NEMA WC 53/ICEA T-27-581-2016Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/NEMA WC 54/ICEA T-26-465-2013Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation and Portable Cables for Test
ANSI/NEMA WC 55021-2013Standard for Military Internal Electrical Cable
ANSI/NEMA WC 57-2014/ICEA S-73-532-2014Standard for Control, Thermocouple Extension, and Instrumentation Cables
ANSI/NEMA WC 61-2005 (R2015)American National Standard for Transfer Impedance Testing
ANSI/NEMA WC 63.2-1996 (R2003)Performance Standard for Coaxial Premise Data Communications Cables
ANSI/NEMA WC 66/ICEA S-116-732-2013Standard for Category 6 and 6A, 100 Ohm, Individually Unshielded Twisted Pairs, Indoor Cables (With or Without an Overall Shield) for Use in LAN Communication Wiring Systems
ANSI/NEMA WC 67-2015American National Standard for Uninsulated Conductors-Used in Electrical and Electronic Applications
ANSI/NEMA WC 70-2009/ICEA S-95-658-2009Power Cables Rated 2,000 V or Less for the Distribution of Electrical Energy
ANSI/NEMA WC 71 ICEA S-96-659-2014 Standard for Non-Shielded Cables Rated 2,001-5,000 V for Use in the Distribution of Electric Energy
ANSI/NEMA WC 74/ICEA S-93-639-20125-46 kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy
ANSI/NEMA WC 75-2015Standard for Controlled Impedance in Internal Electrical Cable
ANSI/NEMA WD 6-2016Wiring Devices-Dimensional Specifications
C78.1407-2004 (R2008, R2015)American National Standard for Electric Lamps-Condenser-Reflector, Four-Pin Prefocus-Base Projection Lamps-Dimensions
C78.379-2006 (R2015)American National Standard for Electric Lamps-Classification of the Beam Patterns of Reflector Lamps
HIMSS/NEMA HN 1-2013Manufacturer Disclosure Statement for Medical Device Security
IDEA BPP 4-2015IDW Packaging and UOM v05.04
IDEA BPP 5-2015IDW Product Change Management v05.04
IDEA CL 1-2015IDW Classification and Marketing Descriptor Model v05.00
IDEA EPG 1-2015IDW B Views EDIPro Guideline v05.04
IDEA FFG 1-2016IDW Attributed Data Flat File Guideline v05.04
IDEA FFG 2-2015IDW B Views FlatFile Guideline v05.04
IDEA FFG 3-2015Simple Net Price Flat File Guideline_v01.03
IDEA PDD 1-2016IDW Data Validation and Change Rules v05.04
IDEA PDD 2-2015IDW PDD v05.04
IDEA XML 1-2016IDW Attributed Data XML Guideline v05.04
IDEA XML 2-2015IDW B Views XML Guideline v05.04
NEMA 250-2014Enclosures for Electrical Equipment (1,000 V Maximum)
NEMA 260-1996 (2004)Safety Labels for Pad-Mounted Switchgear and Transformers Sited in Public Areas
NEMA 410-2015Performance Testing for Lighting Controls and Switching Devices with Electronic Drivers and Discharge Ballasts
NEMA 5RN 2189-2003User Guide to Product Specifications for Metal Electrical Conduit and Tubing
NEMA AB 5-2011Establishing Levels of Selective Coordination for Low Voltage Circuit Breakers
NEMA BL 2-2009 Energy Efficiency for Electronic Ballasts for T8 Fluorescent Lamps
NEMA BL 3-2013Dimming Ballast Energy Performance
NEMA BU 1.1-2005 (Spanish)Instrucciones Generales para el Manejo, Instalacion, Operacion y Mantenimiento de Electroductos Hasta 600 V Nominales o Menos
NEMA BU 1.1-2010General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less
NEMA BU 1.2-2002 (R2008, R2013)Application Information for Busway Rated 600 V or Less
NEMA BWCP 1-2012The Evolution of Aluminum Conductors Used for Building Wire and Cable
NEMA C12.24 TR-2011NEMA Technical Report Definitions for Calculations of VA, VAh, VAR, and VARh for Poly-Phase Electricity Meters
NEMA C12.30 TR-2013Test Requirements for Metering Devices Equipped with Service Switches
NEMA CB 1-2000 (R2012)Brushes for Electrical Machines
NEMA CG 1-2013Manufactured Graphite/Carbon Electrodes
NEMA CG 2-2004Powdered Graphite
NEMA DC 10-2009 (R2014)Residential Controls-Temperature Limit Controls for Electric Baseboard Heaters
NEMA DC 12-1985 (R1991, R1996, R2002, R2008, R2013)Residential Controls-Hot Water Immersion Controls
NEMA DC 13-1979 (R1985, R1991, R1997, R2002, R2008, R2013)Residential Controls-Line Voltage Integrally Mounted Thermostats for Electric Heaters
NEMA DC 20-1992 (R2003, R2009, R2014)Residential Controls-Class 2 Transformers
NEMA DC 3, Annex A-2013Energy-Efficiency Requirements for Programmable Thermostats
NEMA DC 3-2013Residential Controls-Electrical Wall-Mounted Room Thermostats
NEMA DC 5-1989 (R1996, R2002, R2008)Residential Controls-Surface-Type Controls for Electric Storage Water Heaters
NEMA EM 1-2010Exit Sign Visibility Testing Requirements for Safety and Energy Efficiency
NEMA EVSE 1.2-2015​EV Charging Network Interoperability Standard Part 2 A Contactless RFID Credential for Authentication (UR Interface)
NEMA EW 1-1988 (R1994, R1999, R2004)Electric Arc-Welding Power Sources
NEMA EW 3-1983 (R1995, R1999, R2002)Semi-Automatic Wire-Feed Systems for Arc Welding
NEMA EW 4-2009Graphic Symbols for Arc-Welding and Cutting Apparatus
NEMA EW 6-2006Guidelines for Precautionary Labeling for Arc-Welding and Cutting Products
NEMA EW 9-2012Arc Welding Power Sources–Energy Consumption Testing and Labeling
NEMA EWS 1.3-2016Glossary of Terms Used in the Water Sector
NEMA EWS 1.4-2016Literature Review
NEMA EWS 1.5-2016US Water-Related Infrastructure Needs and Potential Funding Opportunities
NEMA EWS 1-2016Increasing Energy Efficiency in Urban Water Systems: Summary Report
NEMA FB 2.10-2013Selection and Installation Guidelines for Fittings for Use with Non-Flexible Electrical Metal Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit and Electrical Metallic Tubing)
NEMA FB 2.20-2014Selection and Installation Guidelines for Fittings for Use with Flexible Electrical Conduit and Cable
NEMA FB 2.40-2016Installation Guidelines for Expansion and Expansion/Deflection Fittings
NEMA FG 1-1993Fiberglass Cable Tray Systems
NEMA FI 2-1992 (R1999, R2004)Untreated Mica Paper Used for Electrical Insulation
NEMA FU 1-2012Low Voltage Cartridge Fuses
NEMA GD 1-2016Evaluating Water-Damaged Electrical Equipment
NEMA GD 2-2016Evaluating Fire- and Heat-Damaged Electrical Equipment
NEMA HP 100-1991 (R1999, R2005, R2010) Series (HP 100-100.4)High-Temperature Instrumentation and Control Cables
NEMA HP 7-2011Electrical and Electronic PVC, PVC/Nylon, and PE/Nylon 105ºC Hook-Up Wire, Types B, C, D, BN, CN, and DN (600, 1000, and 3000 V), and Types J and JN 75ºC (600V)
NEMA HV 2-2014​Suspension and Post Type Insulators for Electric Power Overhead Lines General Use Information
NEMA IA 2.2-2005Programmable Controllers (PLC), Part 2 Equipment Requirements and Test
NEMA IA 2.3-2005Programmable Controllers (PLC), Part 3 Programming Languages
NEMA IA 2.5-2005Programmable Controllers (PLC), Part 5 Communications
NEMA IA 2.7-2005Programmable Controllers (PLC), Part 7 Fuzzy Control Programming
NEMA IA 2.8-2005Programmable Controllers (PLC), Part 8 Guidelines for the Application and Implementation of Programming Languages
NEMA ICS 1.1-1984 (R1988, R1993, R1998, R2003, R2009, R2015)Safety Guidelines for the Application, Installation and Maintenance of Solid State Control
NEMA ICS 1.3-1986 (R2001, R2009, R2015)Preventive Maintenance of Industrial Control and Systems Equipment
NEMA ICS 10-2005, Part 1Part 1 Electromechanical AC Transfer Switch Equipment
NEMA ICS 10-2005, Part 2AC Transfer Equipment, Part 2 Static AC Transfer Equipment
NEMA ICS 10-2010, Part 3Safety Bulletin NEMA Safety Considerations for Residential Transfer Equipment and Residential Transfer Switches
NEMA ICS 10-2015, Part 4Guide to Application of Low-voltage Automatic Transfer Switch Equipment
NEMA ICS 12.1-1997Industrial Control and Systems Profiles of Networked Industrial Devices-Part 1 General Rules
NEMA ICS 1-2000 (R2005, R2008, R2015)Industrial Control and Systems General Requirements
NEMA ICS 14-2015Application Guide for Electric Fire Pump Controllers
NEMA ICS 15.1-2012Instructions for the Handling, Installation, Operation, and Maintenance of Medium Voltage Electric Fire Pump Controllers Rated Not More Than 7200V
NEMA ICS 15-2011Instructions for the Handling, Installation, Operation and Maintenance of Electric Fire Pump Controllers Rated Not More Than 600 V
NEMA ICS 16-2001Motion/Position Control Motors, Controls and Feedback Devices
NEMA ICS 18-2001 (R2007)Motor Control Centers
NEMA ICS 19-2002 (R2007)Diagrams, Device Designations and Symbols
NEMA ICS 2.3-1995 (R2002, R2008)Instructions for the Handling, Installation, Operation and Maintenance of Motor Control Centers Rated Not More Than 600 V
NEMA ICS 2.4-2003 (R2012)NEMA and IEC Devices for Motor Service-A Guide for Understanding the Differences
NEMA ICS 20-2009 (R2015) Informational Guide to Electrical Industrial Topics
NEMA ICS 2-2000 (R2005)Controllers, Contactors and Overload Relays Rated 600 V
NEMA ICS 2-2002, Part 9 (R2007, R2013)AC Vacuum-Break Magnetic Controllers Rated 1,500 V AC
NEMA ICS 3.1-2009 (R2014) Guide for the Application, Handling, Storage, Installation and Maintenance of Medium Voltage AC Contactors, Controllers and Control Centers
NEMA ICS 3-2005 (R2010)Medium Voltage Controllers Rated 2,001 to 7,200 V AC
NEMA ICS 4-2015Application Guideline for Terminal Blocks
NEMA ICS 5, Annex B-2002 (R2008)Typical Proximity Switch Specifications
NEMA ICS 5, Annex E-2002 (R2008)Additional Requirements for Proximity Switches Suitable for Use in Strong Magnetic Fields
NEMA ICS 5, Annex F-2002 (R2007, R2012)High-Pressure Power Wash Test Procedure for Self-Contained Control-Circuit Devices
NEMA ICS 5-2000 (R2005, R2010)Control Circuit and Pilot Devices
NEMA ICS 61131-1-2005 (R2013) (Formerly NEMA IA 2.1-2005) Programmable Controllers (PLC), Part 1 General Information
NEMA ICS 61131-4-2005 (R2013) (Formerly NEMA IA 2.4-2005) Programmable Controllers, Part 4 User Guidelines
NEMA ICS 61800-1-2002 (R2007)Adjustable Speed Electrical Power Drive Systems, Part 1 General Requirements-Rating Specifications for Low Voltage Adjustable-Speed DC Power Drive Systems
NEMA ICS 61800-2-2005Adjustable Speed Electrical Power Drive Systems, Part 2 General Requirements-Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive Systems
NEMA ICS 61800-4-2004Adjustable Speed Electrical Power Drive Systems, Part 4 General Requirements-Rating Specifications for AC Power Drive Systems Above 1,000 V AC and Not Exceeding 35 kV
NEMA ICS 61800-6 TR-2015Adjustable Speed Electrical Power Drive Systems, Part 6: Guide for Determination of Types of Load Duty and Corresponding Current Ratings
NEMA ICS 6-1993 (R2001, R2006)Industrial Control and Systems Enclosures
NEMA ICS 7.1-2014Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable Speed Drive Systems
NEMA ICS 7.2-2015Application Guide for AC Adjustable Speed Drive Systems
NEMA ICS 7-2014Adjustable Speed Drives
NEMA IIC 1 v02Digital Imaging and Communications in Security Information Object Definitions (IODs)
NEMA KS 1-2013Heavy Duty Enclosed and Dead-Front Switches (600 Volts Maximum)
NEMA KS 3-2010Guidelines for Inspection and Preventive Maintenance of Switches Used in Commercial and Industrial Applications
NEMA LC 1-2007 (R2013)Test Procedure for Compatibility of Hearing Aids and Ultrasonic Lighting Control Devices
NEMA LE 4-2012Recessed Luminaires-Ceiling Compatibility
NEMA LE 5-2001Procedure for Determining Luminaire Efficacy Ratings for Fluorescent Luminaires
NEMA LE 5A-1999Procedure for Determining Luminaire Efficacy Ratings for Commercial, Non-Residential Downlight Luminaires
NEMA LE 5B-1998Procedure for Determining Luminaire Efficacy Ratings for High-Intensity Discharge (HID) Industrial Luminaires
NEMA LE 6-2014Procedure for Determining Target Efficacy Ratings for Commercial, Industrial, and Residential Luminaires
NEMA LE 7-2015 Recessed Luminaires Intended for Contact with Expanding Polyurethane Foam Insulation
NEMA LI 1-1998 (R2011)Industrial Laminated Thermosetting Products
NEMA LI 6-1993 (R1999, R2005)Relative Temperature Indices of Industrial Thermosetting Laminates
NEMA LL 8-2010Limits on Mercury Content in Self-Ballasted Compact Fluorescent Lamps
NEMA LL 9-2011Dimming of T8 Fluorescent Lighting Systems​​
NEMA LSCR-PP 1-2015Light Source Color Rendition
NEMA LSD 68-2013Remote Phosphor Devices Used in LED Lamps, Engines and Luminaires
NEMA LSD 70-2014A Comparison of High Performance Luminaire Programs in the US Market
NEMA MG 10-2013Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors
NEMA MG 11-1977 (R1997, R2001, R2007, R2012)Energy Management Guide for Selection and Use of Single-Phase Motors
NEMA MG 1-2011 Condensed Information Guide for General Purpose Industrial AC Small and Medium Squirrel-Cage Induction Motor Standards
NEMA MG 1-2016Motors and Generators
NEMA MG 2-2014Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators
NEMA MG 3-1974 (R1995, R2000, R2006, R2012, R2014)Sound Level Prediction for Installed Rotating Electrical Machines
NEMA MS 10-2010Determination of Local Specific Absorption Rate (SAR) in Diagnostic Magnetic Resonance Imaging (MRI)
NEMA MS 11-2010Determination of Gradient-Induced Electric Fields in Diagnostic Magnetic Resonance Imaging
NEMA MS 1-2008 (R2014)Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging
NEMA MS 12-2010Quantification and Mapping of Geometric Distortion for Special Applications
NEMA MS 2-2008 (R2014)Determination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance Images
NEMA MS 3-2008 (R2014)Determination of Image Uniformity in Diagnostic Magnetic Resonance Images
NEMA MS 4-2010Acoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging (MRI) Devices
NEMA MS 5-2009Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging
NEMA MS 6-2008 (R2014)Determination of Signal-to-Noise Ratio and Image Uniformity for Single-Channel, Non-Volume Coils in Diagnostic Magnetic Resonance Imaging (MRI)
NEMA MS 8-2008Characterization of the Specific Absorption Rate (SAR) for Magnetic Resonance Imaging Systems
NEMA MS 9-2008 (R2014)Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images (MRI)
NEMA MW 750-2009 (R2014)Dynamic Coefficient of Friction of Film-Insulated Magnet Wire
NEMA MW 765-2003 (R2008, R2013)Reclaiming of Magnet Wire Packaging
NEMA MW 780-2005 (R2011)Returnable Packaging for 24x6 Magnet Wire Reels
NEMA MW 785-2000 (R2006, R2011)Simulated Insertion Force Test for Film-Insulated Round Magnet Wire
NEMA MW 820-2016​Conductor Softness Testing Methods
NEMA NS 1-2005Guide for Preparation of NEMA Standards Publications
NEMA NU 1-2012Performance Measurements of Gamma Cameras
NEMA NU 2-2012Performance Measurements of Positron Emission Tomographs (PETs)
NEMA NU 3-2004Performance Measurements and Quality Control Guidelines for Non-Imaging Intraoperative Gamma Probes
NEMA NU 4-2008 Performance Measurements of Small Animal Positron Emission Tomographs (PETs)
NEMA OS 3-2012Selection and Installation Guidelines for Electrical Outlet Boxes
NEMA PB 1.1-2002 (en Espanol)Instrucciones Generales para la Instalacion, Operacion y el Mantenimiento Correcto de Tableros de Alumbrado y Control Hasta 600 V Nominales o Menos
NEMA PB 1-2011Panelboards
NEMA PB 2.1-2002 (en Espanol)Instrucciones Generales para el Manejo, Instalacion, Operacion y Mantenimiento Correcto de Tableros de Distribucion de Frente Muerto Hasta 600 V Nominales o Menos
NEMA PB 2.2-2014Application Guide for Ground-Fault Protective Devices for Equipment
NEMA PB 2-2011Deadfront Distribution Switchboards
NEMA PE 1-2012Uninterruptible Power Systems (UPS)-Specification and Performance Verification
NEMA PE 5-1997 (R2003)Utility-Type Battery Chargers
NEMA PE 7-1997 (R2003)Communications-Type Battery Chargers
NEMA PremiumGeneral Specification for Consultants, Industrial and Municipal NEMA Premium® Efficiency Electric Motors (600 V or Less)
NEMA PRP 1-2014​​Guidelines for Conduit-in-Casing Construction
NEMA PRP 2-2014Guidelines for Solvent-Cementing Joints for PVC Rigid Nonmetallic Conduit, Duct, and Fittings
NEMA PRP 3-2009 Expansion Epoxy-Based Fittings for RTRC Rigid Nonmetallic Conduit
NEMA PRP 4-2009Expansion Fittings for Polyvinyl Chloride (PVC) Rigid Nonmetallic Conduit
NEMA PRP 5-2015Installation Guidelines for Surface Nonmetallic Raceway
NEMA RE 2-1999Electrical Insulating Varnish
NEMA RN 1-2005 (R2013)Polyvinyl Chloride (PVC) Externally Coated Galvanized Rigid Steel Conduit and Intermediate Metal Conduit
NEMA RN 2-1997 (R2009)Packaging of Master Bundles for Electrical Rigid Metal Conduit (ERMC)-Steel, Electrical Intermediate Metal Conduit (EIMC)-Steel, and Electrical Metallic Tubing (EMT)-Steel
NEMA RN 3-1991 (R2002)Product Identification Numbers for Metallic Tubular Conduit Products for Use with Bar Coding and Electric Data Interchange (EDI) Applications
NEMA RT 1-2014Gating Interface
NEMA RV 1-2014Application and Installation Guidelines for Armored Cable and Metal-Clad Cable
NEMA RV 2-2011Application and Installation Guidelines for Nonmetallic-Sheathed (NM-B) Cable and Underground Feeder and Branch Circuit (UF-B) Cable
NEMA RV 3-2014Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal and Nonmetallic Conduits
NEMA RV 4-2012Application Guidelines for Service-Entrance Cable
NEMA SB 10-1991 (R1998, R2005, R2010)Audio Standard for Nurse Call Systems
NEMA SB 11-2011Guide for Proper Use of System Smoke Detectors
NEMA SB 1-2014Quality Informational Guide for Automatic Fire Detection and Alarm Systems
NEMA SB 13-2012Guide for Proper Use of Smoke Detectors in Duct Applications
NEMA SB 20-2015​Guide to Understanding Smoke Control Systems
NEMA SB 2-2010Training Manual on Fire Alarm Systems
NEMA SB 23-2016Guide for Application of Flame Detection
NEMA SB 50-2014Emergency Communications Audio Intelligibility Applications Guide
NEMA SB 7-2013Applications Guide for Carbon Monoxide Alarms and Detectors
NEMA SBP 1-2010Looking Ahead to UL 2560
NEMA SG 10-2013Guide to OSHA and NFPA 70E Safety Requirements When Servicing and Maintaining Medium-Voltage Switchgear, Circuit Breakers, and Medium-Voltage Controllers Rated above 1000 V
NEMA SG 11-2013Guide for Handling and Maintenance of AC Outdoor High Voltage Circuit Breakers
NEMA SG 4-2009 (R2013)Alternating Current High Voltage Circuit Breakers
NEMA SG-AMI 1-2009Requirements for Smart Meter Upgradeability
NEMA SSL 1-2010​Electronic Drivers for LED Devices, Arrays or Systems​
NEMA SSL 3-2011High-Power White LED Binning for General Illumination
NEMA SSL 4-2012Retrofit Lamps-Minimum Performance Requirements
NEMA SSL 6-2010Solid State Lighting for Incandescent Replacement-Dimming
NEMA SSL 7A-2015​​Phase-Cut Dimming for Solid State Lighting-Basic Compatibility
NEMA ST 20-2014Dry Type Transformers for General Applications
NEMA TC 13-2014Electrical Nonmetallic Tubing (ENT)
NEMA TC 14.AG-2015Aboveground Reinforced Thermosetting Resin Conduit and Fittings
NEMA TC 14.BG-2015Belowground Reinforced Thermosetting Resin Conduit and Fittings
NEMA TC 14.XW-2015Extra Heavy Wall Aboveground Reinforced Thermosetting Resin Conduit and Fittings
NEMA TC 14-2015 Series Reinforced Thermosetting Resin Conduit and Fittings Series
NEMA TC 18-2013Packaging of Master Bundles for EPC-40 Polyvinyl Chloride (PVC) Conduit
NEMA TC 19-2001 (R2009)Nonmetallic Riser U-Type Guards
NEMA TC 2-2013Electrical Polyvinyl Chloride (PVC) Tubing and Conduit
NEMA TC 3-2015Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and Tubing
NEMA TC 6 & 8-2013Polyvinyl Chloride (PVC) Plastic Utilities for Underground Installations
NEMA TC 7-2013Smooth Wall Coilable Electrical Polyethylene Conduit
NEMA TC 9-2004 (R2012)Fittings for Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground Installation
NEMA TCB 2-2012NEMA Guidelines for the Selection and Installation of Underground Nonmetallic Duct
NEMA TCB 3-2001 (R2009) User's Manual for the Installation of Underground Corrugated Coilable Plastic Utility Duct (CCD)
NEMA TF 1-1993 (R2000, R2005)Coated Electrical Sleeving
NEMA TR 1-2013Transformers, Regulators and Reactors
NEMA TS 1-1989 (R1994, R2000, R2005)Traffic Control Systems (Not Recommended for New Designs)
NEMA TS 2-2016Traffic Controller Assemblies with NTCIP Requirements-Version 03.07
NEMA TS 4-2005Hardware Standards for Dynamic Message Signs (DMS) with NTCIP Requirements
NEMA TTGR-NThe Grounding System That Works-Steel Conduit (Electrical Metallic Tubing, Intermediate Metal Conduit and Galvanized Rigid)
NEMA UC 2-1993 (R2000, R2005, R2010, R2015)Undercarpet Power Distribution Systems
NEMA UD 2-2004 (R2009)Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3
NEMA UD 3-2004 (R2009)Standard for Real-Time Display of Thermal and Mechanical Acoustic Output Indices on Diagnostic Ultrasound Equipment, Revision 2
NEMA VE 1-2009Metal Cable Tray Systems
NEMA VE 2-2013Cable Tray Installation Guidelines
NEMA WC 26/EEMAC 201-2008Binational Wire and Cable Packaging Standard
NEMA WC 52-2005High-Temperature and Electronic Insulated Wire, Impulse Dielectric Testing
NEMA WC 56-1986 (R1993, R2000, R2005, R2012)3.0 kHz Insulation Continuity Proof Testing of Wire and Cable
NEMA WC 58-2008/ICEA S-75-381Portable and Power Feeder Cables for Use in Mines and Similar Applications
NEMA WC 62-1992 (R1999, R2004)Repeated Spark/Impulse Dielectric Testing
NEMA WC 63.1-2005Performance Standard for Twisted Pair Premise Voice and Data Communications Cables
NEMA WC 65-1995 (R2003)A Reasoned Approach to Solving Solderability Problems with Tin-Coated and Nickel-Coated Stranded Conductors in High-Performance Wire and Cable Applications
NEMA WC 72-1999 (R2004, R2015)Continuity of Coating Testing for Electrical Conductors
NEMA WC 73-2000 (R2005, R2012)Wire Selection Guidelines for Wires Rated at 200° to 450°C
NEMA WD 1-1999 (R2005, R2010, R2015)General Color Requirements for Wiring Devices
NEMA WD 7-2011Occupancy Motion Sensors Standard
NEMA WD 8-2013Guidelines for Electrical Wiring Device Replacement
NEMA WD 9-2013Dimmers, Photoelectric Controls, Presence Sensors, and Multi-outlet Bars Energy Consumption Testing and Labeling
NEMA XR 15-1991 (R1996, R2001)Test Standard for the Determination of the Visible Entrance Field Size of an X-Ray Image Intensifier (XRII) System
NEMA XR 16-1991 (R1996, R2001)Test Standard for the Determination of the System Contrast Ratio (SCR) and the System Veiling Glare Index (SVGI) of an X-Ray Image Intensifier (XRII) System
NEMA XR 22-2006Quality Control Manual Template for Manufacturers of Displays and Workstations Labeled for Final Interpretation in Full-Field Digital Mammography (FFDM)
NEMA XR 23-2006Quality Control Manual Template for Manufacturers of Hardcopy Output Devices Labeled for Final Interpretation in Full-Field Digital Mammography (FFDM)
NEMA XR 24-2008 (R2014)Primary User Controls for Interventional Angiography X-Ray Equipment
NEMA XR 25-2010Computed Tomography Dose Check
NEMA XR 26-2012Access Controls for Computed Tomography—Identification, Interlocks, and Logs
NEMA XR 27-2013 with Amendment 1X-ray Equipment for Interventional Procedures User Quality Control Mode
NEMA XR 28-2013Supplemental Requirements for User Information and System Function Related to Dose in CT
NEMA XR 29-2013Standard Attributes on CT Equipment Related to Dose Optimization and Management
NEMA XR 31-2016Standard Attributes on X-ray Equipment for Interventional Procedures
NEMA/MITA 1-2015 Good Refurbishment Practices for Medical Imaging Equipment
NEMA/MITA XR 30-2016Quality Control Tools for Digital Projection Radiography
NTCIP 1102:2004Octet Encoding Rules (OER) Base Protocol
NTCIP 1103 v02Transportation Management Protocols (TMP)
NTCIP 1104 v01Center-to-Center Naming Convention Specification
NTCIP 1201 v03Global Object (GO) Definitions
NTCIP 1202:2005Object Definitions for Actuated Traffic Signal Controller (ASC) Units-Version 02
NTCIP 1203 v03Object Definitions for Dynamic Message Signs (DMS)
NTCIP 1204 v03Environmental Sensor Station (ESS) Interface Protocol
NTCIP 1205:2001Object Definitions for Closed-Circuit Television (CCTV) Camera Control
NTCIP 1206:2005Object Definitions for Data Collection and Monitoring (DCM) Devices
NTCIP 1207 v02Object Definitions for Ramp Meter Control (RMC) Units
NTCIP 1208:2005Object Definitions for Closed-Circuit Television (CCTV) Switching
NTCIP 1209 v02Object Definitions for Transportation Sensor Systems (TSS)
NTCIP 1210 v01Field Management Stations (FMS)—Part 1: Object Definitions for Signal System Masters (SSM)
NTCIP 1211 v02Object Definitions for Signal Control and Prioritization (SCP)
NTCIP 1213 v02Object Definitions for Electrical and Lighting Management Systems (ELMS)
NTCIP 2101:2001Point to Multi-Point Protocol Using RS-232 Subnetwork Profile
NTCIP 2102:2003Point to Multi-Point Protocol Using FSK Modem Subnetwork Profile
NTCIP 2103 v02Point-to-Point Protocol over RS-232 Subnetwork Profile
NTCIP 2104:2003Ethernet Subnetwork Profile
NTCIP 2201:2003Transportation Transport Profile
NTCIP 2202:2001Internet (TCP/IP and UDP/IP) Transport Profile
NTCIP 2301 v02Simple Transportation Management Framework (STMF) Application Profile (AP) (AP-STMF)
NTCIP 2302:2001Trivial File Transfer Protocol Application Profile
NTCIP 2303:2001File Transfer Protocol Application Profile
NTCIP 2304:2002Application Profile for DATEX-ASN (AP-DATEX)
NTCIP 2306 v01Application Profile for XML Message Encoding and Transport in ITS Center-to-Center Communications
NTCIP 8003:2001Profile Framework
NTCIP 8004 v02Structure and Identification of Management Information (SMI)
NTCIP 8005 v01Procedures for Creating Management Information Base (MIB) Files
NTCIP 8007 v01Testing and Conformity Assessment Documentation within NTCIP Standards Publications
NTCIP 9001 v04The NTCIP Guide
​​

 

Copyright © NEMA. All rights reserved. (703) 841-3200, 1300 North 17th Street, Suite 900, Arlington, Virginia 22209