Facebook  |  Twitter  |  Google Plus  |  LinkedIn  |  Print

NEMA Publishes NEMA SSL 7A-2013 Phase Cut Dimming for Solid State Lighting: Basic Compatibility


04/22/2013 1:00PM

The National Electrical Manufacturers Association (NEMA) published NEMA SSL 7A-2013 Phase Cut Dimming for Solid State Lighting: Basic Compatibility.

This standard provides compatibility requirements when a forward phase cut dimmer is combined with one or more dimmable LED Light Engines (LLEs). An LLE comprises one or more LED modules, LED control gear (integral or remote), and a connection to the mains circuit. This includes both screw-in integrated LED lamps, as well as fixtures which contain separate LED drivers.

NEMA SSL 7A-2013 is meant to reduce the testing burden by utilizing synthetic loads and waveform generators to represent LLEs and dimmers during testing. All dimmers and LLEs tested against the criteria set forth in SSL 7A will be compatible with one another, without the need for specific testing of every lamp and dimmer pairing. In addition, it supports modern digital dimmers by providing dimmer power supply current requirements for compatibility with LLEs.

The requirements do not limit its use to any specific lighting product type or application. The standard was developed with input from global participants and includes requirements for a range of supply voltages and frequencies, making it suitable for global use. For the purposes of this standard, “compatibility” means:

  • The reliability of the dimmer and LLE are not affected by combining them.    
  • Dimming behavior meets or exceeds the behavior specified in the standard.

NEMA SSL 7A-2013 is forward-looking and is intended to be used to design and qualify dimmer and LLE products (including integral or remote control gear) for use with each other. It is not intended for use to determine compatibility with existing products or the installed base of LLEs and phase cut dimmers.

View the contents and scope of NEMA SSL 7A-2013. A hard or electronic copy may be purchased for $54 by visiting global.ihs.com, or contacting IHS by phone at 800-854-7179 (U.S. only) or 303-397-7956 (international).    

​​​​​​​

The National Electrical Manufacturers Association (NEMA) represents nearly 400 electrical, medical imaging, and radiation therapy manufacturers. Our combined industries account for more than 400,000 American jobs and more than 7,000 facilities across the U.S. Domestic production exceeds $117 billion per year. Our industry is at the forefront on electrical safety, reliability, resilience, efficiency, and energy security.

Press/Public Relations Contacts:
NEMA Communications Department
Email: Contact Form

 

Related Products

  • No Products
Copyright © NEMA. All rights reserved. (703) 841-3200, 1300 North 17th Street, Suite 900, Arlington, Virginia 22209